Patton electronic PATTON 2707/I user manual 10Base-T Port 10Base-T DTE RJ-45 Pin No

Page 15

10Base-T Port

10Base-T DTE

RJ-45 Pin No.

RJ-45 Pin No.

1 (TD+)

1

(TD+)

2 (TD-)

2

(TD-)

3 (RD+)

3

(RD+)

6 (RD-)

6

(RD-)

Figure 8. 10Base-T cross-over cable connection

Connecting the 10Base-T Ethernet Port to a Hub

The 10Base-T interface is configured as DTE (data terminal equipment), just like a 10Base-T network interface card in a PC. Therefore, it “expects” to connect to a 10Base-T Hub using a straight-through RJ-45 cable. Refer to Figure 9 below and Figure 7 on page 14 to construct a cable to connect the 10 Base-T interface to a 10Base-T hub.

10Base-T Port

 

10Base-T Hub

RJ-45 Pin No.

 

RJ-45 Pin No.

1 (TD+)

 

1

(RD+)

2 (TD-)

 

2

(RD-)

 

3 (RD+)

 

3

(TD+)

 

6 (RD-)

 

6

(TD-)

 

Figure 9. Connecting the 10Base-T Ethernet port to a hub

Power Connection

Universal AC Power (100—240 VAC).The Model 2707/I uses a 5VDC, 2A universal input 100-240VAC, power supply (center pin is +5V). The universal input power supply has a male IEC-320 power entry connector. This power supply connects to the Model 2707/I by means of a barrel jack on the rear panel. Many international power cords are available for the universal power supply.

Note The Model 2707/I powers up as soon as it is plugged into an AC outlet—there is no power switch.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents User Manual Specifications Warranty InformationConfiguration InstallationFactory Replacement Parts and Accessories CE Notice Warranty InformationService Radio and TV InterferencePage Features General InformationDescription Applications PPP Operational BackgroundLAN Model 2707/I Model 2707/C Router Internet EthernetConfiguration DIP Switch ConfigurationsFront Rear SW1-1 Line Encoding Switch S1 settingsSwitch Description Setting SW1-1 Line Coding HDB3 defaultPage Connecting to the G.703 Network and Ethernet LAN InstallationFrom Connecting Dual Coaxial Cable 75 ohm to the G.703 NetworkConnecting the 10Base-T Ethernet port to a PC DTE Connecting the Twisted Pair 120 ohm to the G.703 NetworkRJ-45 Cable 8-Wire 703 2707/I Network Signal PIN#Connecting the 10Base-T Ethernet Port to a Hub 10Base-T Port 10Base-T DTE RJ-45 Pin No10Base-T Port 10Base-T Hub RJ-45 Pin No +Vin POWER-UP OperationLED Status Monitors LED Operating Line Loopback LL 703 NTU Model 2707/I Mbps G.703Device Nominal Impedance Network ConnectorAppendix a Network Data RateDTE Interface DiagnosticsIndicators Appendix BHumidity Power SupplyTemperature DimensionsPatton Model # Description Appendix C

PATTON 2707/I specifications

The Patton Electronics PATTON 2707/I is a versatile and powerful device designed for the efficient transmission of data over various types of connections. It is particularly recognized for its ability to convert various data formats, making it an ideal choice for both industrial and commercial applications.

One of the standout features of the PATTON 2707/I is its dual-purpose functionality as a serial-to-Ethernet and Ethernet-to-serial converter. This enables users to connect legacy serial devices to modern Ethernet networks, thus facilitating communication between newer and older technologies. With support for both TCP and UDP protocols, the device ensures reliable data transfer over the internet or local area networks.

The PATTON 2707/I uses advanced technology to provide robust and secure data transmission. It incorporates a built-in web server that allows easy configuration and management of the device via a user-friendly interface. This feature simplifies the setup process, enabling users to manage their connections with ease. Additionally, it supports SNMP (Simple Network Management Protocol), which facilitates remote monitoring and management, making it essential for network administrators.

Another significant characteristic of the PATTON 2707/I is its wide compatibility with serial protocols. It supports a variety of data formats, including RS-232, RS-422, and RS-485. This versatility allows for seamless integration with different devices, enhancing its utility in diverse environments. Users can also take advantage of the device’s ability to handle data rates of up to 115200 bps, ensuring fast and efficient communication.

In terms of physical specifications, the PATTON 2707/I is compact and designed for flexibility. It features multiple mounting options, including DIN rail and wall-mount configurations, making it suitable for various installation environments. The robust construction of the device ensures it can withstand industrial conditions, further enhancing its reliability.

Furthermore, the device supports advanced security features, including password-protected access and secure communications protocols. This ensures that data integrity is maintained during transmission, which is crucial for applications that require secure data handling.

In summary, the Patton Electronics PATTON 2707/I is a sophisticated and reliable solution for those needing to integrate serial and Ethernet communications. Its array of features, including dual functionality, web management, wide compatibility, and robust security, make it an indispensable tool in modern data networking. Whether for industrial automation, telecommunications, or any application requiring seamless data connectivity, the PATTON 2707/I stands out as a leader in the field.
Top Page Image Contents