Patton electronic PATTON 2707/I user manual Power Supply, Humidity, Temperature, Dimensions

Page 22

B.12 POWER SUPPLY

5 VDC external power supply 100–240VAC, 50–60Hz, 0.4A

Up to 90% non-condensing

0–50°C (32–122°F)

3.5L x 2.1W x 0.78H in.(9.0L x 5.3W x 2.0H cm)

Image 22

Contents User Manual Installation Warranty InformationConfiguration SpecificationsFactory Replacement Parts and Accessories Radio and TV Interference Warranty InformationService CE NoticePage General Information FeaturesDescription PPP Operational Background ApplicationsModel 2707/I Model 2707/C Router Internet Ethernet LANDIP Switch Configurations ConfigurationFront Rear SW1-1 Line Coding HDB3 default Switch S1 settingsSwitch Description Setting SW1-1 Line EncodingPage Installation Connecting to the G.703 Network and Ethernet LANConnecting Dual Coaxial Cable 75 ohm to the G.703 Network FromNetwork Signal PIN# Connecting the Twisted Pair 120 ohm to the G.703 NetworkRJ-45 Cable 8-Wire 703 2707/I Connecting the 10Base-T Ethernet port to a PC DTE10Base-T Port 10Base-T DTE RJ-45 Pin No Connecting the 10Base-T Ethernet Port to a Hub10Base-T Port 10Base-T Hub RJ-45 Pin No +Vin Operation POWER-UPLED Status Monitors LED 703 NTU Model 2707/I Mbps G.703 Operating Line Loopback LL Device Network Data Rate Network ConnectorAppendix a Nominal ImpedanceAppendix B DiagnosticsIndicators DTE InterfaceDimensions Power SupplyTemperature HumidityAppendix C Patton Model # Description