1.0 WARRANTY INFORMATION
Patton Electronics warrants all Model 570/580 components to be free from defects, and will—at our option—repair or replace the product should it fail within one year from the first date of shipment. This warranty is limited to defects in workmanship or materials, and does not cover customer damage, abuse or unauthorized modification. If this product fails or does not perform as warranted, your sole recourse shall be repair or replacement as described above. Under no condition shall Patton Electronics be liable for any damages incurred by the use of this product. These damages include, but are not limited to, the following: lost profits, lost savings and incidental or consequential damages arising from the use of or inability to use this product. Patton Electronics specifically disclaims all other warranties, expressed or implied, and the installation or use of this product shall be deemed an acceptance of these terms by the user.
1.1 SERVICE
All warranty and non-warranty repairs must be returned freight prepaid and insured to Patton Electronics. All returns must have a Return Materials Authorization number on the outside of the shipping container. This number may be obtained from Patton Electronics Technical Service at (301) 975-1007. Packages received without an RMA number will not be accepted.
Patton Electronics' technical staff is also available to answer any questions that might arise concerning the installation or use of your Model 570/580. Technical Service hours: 8AM to 5PM EST, Monday through Friday.
2.0 GENERAL INFORMATION
Thank you for your purchase of this Patton Electronics product. This product has been thoroughly inspected and tested and is warranted for One Year parts and labor. If any questions or problems arise during installation or use of this product, please do not hesitate to contact Patton Electronics Customer Service at (301) 975-1007.
2.1FEATURES
•Multi-level surge protection
•Operation at Speeds up to 100 Mbps
•Optional 2,4,6 or 8 wire versions
•EIA/TIA TSB-40A Category 5 Compliant
•N.E.X.T. better than -43 dB at 100 MHz
•Shunts surges directly to chassis ground
•Easy to install
2.2DESCRIPTION
Devices that connect to Category-5 cabling systems are routinely threatened by unwanted electrical energy (lightning, AC power induction, ESD and more). Higher speed devices–such as those operating at 100 Mbps–are especially vulnerable to the effects of these hazards, which can include data loss and hardware damage.
The Patton Model 570 and 580 Series Surge Protectors provide effective surge protection for devices operating in Category-5 Cabling Systems. The Model 570 is specifically designed for point-of-use installation; the Model 580 is designed to be installed at the building entrance. Both models use a multi-stage Silicon Avalanche Diode circuit, and will continue functioning while handling the appropriate IEC
801.5surges applicable to their use (see the tables in Appendix B). Both the 570 and 580 will additionally protect against surges up to and exceeding 2kV/1kA in fail-safe mode.
Models 570 and 580 support a wide range of balanced interfaces from RS-422 to 100Base-T. Highlights include a low insertion loss (less than 0.4dB at 100MHz) and minimal near end cross talk (greater than -43 dB at all frequencies up to 100 MHz). Grounding is accomplished via an external ground strap that provides a separate unit-ground to chassis-ground connection.
Warning: This product will not provide complete protection should your equipment or building be subject to a direct lightning hit.