Patton electronic 07MSN4400-QS quick start Introduction, Attaching the cable retainer clip

Page 4

SmartNode 4400 Quick Start Guide

Introduction

This Quick Start Guide leads you through the basic steps to set up a new SmartNode and to download a con- figuration. Please note that this guide does not replace the detailed Software Configuration Guide and the Get- ting Started Guide on the CD-ROM and available online at www.patton.com/voip.

SmartNodes can be used for a wide variety of IP and voice over IP applications. To support and ease the config- uration of the SmartNodes, configuration templates for the most important applications are available online at http://www.patton.com/voip/appnotes.shtml.

Setting up a new SmartNode consists of the following steps:

1.Attach the power cable retainer clip to the unit

2.Connect a PC to the SmartNode, log in and configure your LAN IP address (see page 5 for details)

3.Connect the SmartNode to the LAN (see page 7)

4.Download a configuration example, adapt it to your network, and load it onto the SmartNode (see page 8)

Attaching the cable retainer clip

To secure the power cord, it is necessary to attach the metal retainer clip (if applicable to your model). Squeeze the clip and insert into the holes in the screws on either side of the power connector on your unit. The clip will pop into place.

Power cable retainer clip

Figure 1. Attaching the cable retainer clip

Note Refer to the Getting Started Guide on the CD-ROM or on the Patton website for detailed instrauctions about grounding and connecting power to your unit.

Introduction

4

Image 4
Contents SmartNode Mailsupport@patton.com Safety when working with electricity Introduction Attaching the cable retainer clipConnecting power and configuring the default IP address Connecting to a PC and loggingChanging the IP address 172.16.40.1if-ipeth0#ipaddress 172.16.1.10Connecting the SmartNode to the LAN Connecting the SmartNode to the networkAdditional information Safety compliance ComplianceCE Declaration of Conformity Authorized European RepresentativeSmartNode 4400 Quick Start Guide SmartNode 4400 Quick Start Guide SmartNode 4400 Quick Start Guide