Warranty Information | Patton electronic 2130, 2124 specs

1.0 WARRANTY INFORMATION

Patton Electronics warrants all Model 2124/2130 components to be free from defects, and will—at our option—repair or replace the product should it fail within one year from the ﬁrst date of shipment.

This warranty is limited to defects in workmanship or materials, and does not cover customer damage, abuse or unauthorized modiﬁcation. If this product fails or does not perform as warranted, your sole recourse shall be repair or replacement as described above. Under no condition shall Patton Electronics be liable for any damages incurred by the use of this product. These damages include, but are not limited to, the following: lost proﬁts, lost savings and incidental or consequential damages arising from the use of or inability to use this product. Patton Electronics specif- ically disclaims all other warranties, expressed or implied, and the instal- lation or use of this product shall be deemed an acceptance of these terms by the user.

1.1 RADIO AND TV INTERFERENCE

The Model 2124/2130 generates and uses radio frequency energy, and if not installed and used properly—that is, in strict accordance with the manufacturer’s instructions—may cause interference to radio and televi- sion reception. The Model 2124/2130 has been tested and complies with the limits for a Class A computing device in accordance with the speciﬁcation in Subpart J of Part 15 of FCC rules, that are designed to provide reasonable protection from such interference in a commercial installation. However, this is no guarantee that interference will not occur in a particular installation. If the Model 2124/2130 does cause interfer- ence to radio or television reception, which can be determined by discon- necting the unit, the user is encouraged to try to correct the interference by one or more of the following measures: moving the computing equip- ment away from the receiver, re-orienting the receiving antenna and/or plugging the receiving equipment into a different AC outlet (such that the computing equipment and receiver are on different branches). In the event the user detects intermittent or continuous product malfunction due to nearby high power transmitting radio frequency equipment, the user is strongly advised to use only a shielded twisted pair data cable that is bonded to metalized external outer shield plugs at both ends. The use of a shielded cable satisﬁes compliance with the Electromagnetic Compati- bility (EMC) directive.

2130, 2124 specifications

The Patton Electronics 2124 and 2130 are advanced solutions in the realm of networking, designed to enhance connectivity and support a variety of applications. Known for their robust performance, these devices are particularly useful in scenarios where reliable data transmission is essential, such as in telecommunications and enterprise network environments.

The Patton 2124 model serves as a versatile serial to Ethernet converter, allowing for seamless integration of legacy serial devices into modern IP networks. One of its standout features is the ability to support both asynchronous and synchronous communication protocols, making it suitable for diverse equipment and applications. It supports data rates up to 115.2 Kbps, ensuring high-speed data transfer. Additionally, the 2124 incorporates advanced error detection and correction mechanisms, which enhance data integrity and reliability during transmission.

On the other hand, the Patton 2130 model focuses on VoIP (Voice over Internet Protocol) connectivity, facilitating the transition from traditional telephony systems to IP-based communication. This model supports multiple VoIP standards, including SIP (Session Initiation Protocol) and H.323, making it compatible with a wide range of VoIP applications and services. The 2130 also features high-definition voice codecs, which improve call quality, and a built-in echo cancellation function that minimizes audio distortion during calls.

Both models leverage Patton’s innovative SmartNode technology, which streamlines management and monitoring through web-based interfaces. This capability enables users to configure settings, monitor performance, and diagnose issues remotely, enhancing the overall efficiency of network operation. They are equipped with various interfaces including Ethernet ports, serial ports, and options for multi-port configurations, catering to different deployment scenarios.

Moreover, the rugged design of the 2124 and 2130 models ensures durability in demanding environments. They are built to withstand a range of temperatures and can be mounted in various configurations, adding flexibility to installation options. Power over Ethernet (PoE) support in these models simplifies installation by eliminating the need for separate power supplies.

In summary, the Patton Electronics 2124 and 2130 represent a blend of reliability, versatility, and cutting-edge technology, making them ideal choices for organizations embracing modern networking needs. Whether integrating legacy systems or enhancing VoIP capabilities, these devices are poised to meet the diverse requirements of today’s digital landscape.