Patton electronic 3231 user manual Reset for Factory Default, Saving the configuration

Page 40

Model 3231 User Manual

5 • System Management

 

 

Reset for Factory Default

To recover from a forgotten password, the user may reset the unit to its factory configuration. There is a Reset button located on the rear panel of the unit between the Ethernet and Line ports.

Power

 

5V,

1A

 

Console

Ethernet

Reset

Reset button

Line

Figure 15. Reset button

To reset for factory default:

1.Make sure that the top level menu is displayed on the LCD panel.

2.Press and hold the Reset button for three seconds.

3.After waiting for seven seconds, the LCD screen will go blank, indicating that the system has restarted.

Saving the configuration

To save all configuration changes into non-volatile memory:

1.From the top level menu on the LCD panel, use the Left and Right arrow buttons to navigate to Save Config, and press ENTER.

The current configuration is now saved to flash memory.

Backing up and restoring saved configurations

At times, you may want to store the completed configuration of your 3231 on a PC so you can return to a working configuration easily. You can use the Web GUI to back up and restore saved configurations. (See “Connecting to the Web GUI” on page 26).

Note It is NOT reccommended that you configure basic options through the Web GUI. Use the LCD panel menu to configure basic options such as G.SHDSL, and use the Web GUI for advanced configuration only, such as SNMP.

Reset for Factory Default

40

Image 40
Contents Industrial Ethernet Extender with LCD Interface Mailsupport@patton.com Summary Table of Contents Table of Contents Web Interface Configuration RJ-11non-shielded DSL port List of Figures List of Tables Audience About this guideStructure Precautions Impaired functioningSafety when working with electricity General observationsTypographical conventions used in this document General conventionsChapter contents General informationFeatures Model 3231 OverviewFront Panel Menu keypadLEDs PWR/ALMRear Panel ApplicationInitial Configuration Power up Connecting the G.SHDSL portAC power-up Power-up indicationUsing the LCD Menu Shdsl onCPE Config ShdslSTP Spanning Tree Protocol SyslogConfiguring the unit as CO Setting the unit as CO/CPEConfiguring the unit as CPE CLI Commands Using the CLIConnect a PC and log Shdsl Factory default IP address Connecting to the Web GUIModifying the IP address Connecting to the local IP network Logging into the web management interfaceShdsl Configuration and Status Shdsl Error Monitor Configuration Shdsl ConfigurationShdsl Options Viewing G.SHDSL Status Loss Of Signal Indicates Signal Loss or Signal Found Run-Time StatisticsDSL Line Error Counters Local Interface Error CountersClearing Error Counters Clearing the error countersWeb Interface Configuration Using the Web Interface Snmp Configuring STP in the Web GUI STP Spanning Tree ProtocolCPE Configuration Click Get CPE ConfigurationSystem Management Saving the configuration Reset for Factory DefaultBacking up and restoring saved configurations System Software Upgrade System Management menu, click on Software UpgradeSoftware upgrade protection Syslog Options in the LCD MenuContacting Patton for assistance Contact information Warranty coveragePatton support headquarters in the USA Out-of-warranty service RMA numbersAppendix a Compliance information Safety ComplianceFCC Part 68 Acta Statement Radio and TV Interference FCC PartCE Declaration of Conformity Industry Canada NoticeAuthorized European Representative Appendix B Specifications General characteristics Shdsl characteristicsEthernet Protocol supportSerial connector DiagnosticsManagement 10Base-T/100Base-TX interfacePower DimensionsLine Interface EnvironmentAppendix C RJ-11 non-shielded DSL port RJ-11 non-shielded DSL port Appendix D RJ-45 shielded 10/100 Ethernet port RJ-45 shielded 10/100 Ethernet port Appendix E RS-232 console interface Pin assignments RJ-45 non-shielded Connector EIA-561 RS-232 console interface pin assignments
Related manuals
Manual 189 pages 54.76 Kb

3231 specifications

The Patton Electronics 3231 is a versatile and robust device designed primarily for serial to Ethernet connectivity, catering to a wide range of applications in networking and data communication. This device exemplifies Patton Electronics’ dedication to delivering high-quality solutions that streamline communication processes across various sectors.

One of the standout features of the Patton 3231 is its ability to facilitate seamless data transfer between serial devices and IP networks. This is particularly advantageous for industries that rely on legacy equipment, enabling them to connect to modern network architectures without requiring extensive upgrades or replacements. The device supports RS-232, RS-422, and RS-485 serial interfaces, making it compatible with various devices commonly used in industrial and commercial settings.

The Patton 3231 integrates advanced technologies, such as Transparent TCP and UDP modes, which allow for flexible communication options based on user requirements. Users can choose between connecting to a local network or communicating over the internet, ensuring versatile deployment in different environments. Moreover, the device’s ability to handle multiple connection types enhances its practicality for diverse applications.

In terms of connectivity, the 3231 is equipped with both Ethernet and RS-232/422/485 ports, enabling users to easily integrate and configure the device within existing systems. The included user-friendly interface simplifies configuration, allowing even those with minimal technical expertise to set up the device quickly and efficiently. The unit also features LED indicators, providing real-time status updates for connection and operational health.

Furthermore, the Patton 3231 offers exceptional security features to protect sensitive data during transmission. This includes support for encrypted communications, ensuring data integrity and confidentiality, which is crucial in sectors such as healthcare, finance, and utilities.

Durability and reliability are also key characteristics of the 3231. Built to withstand challenging environments, the device features a rugged design suitable for various industrial applications. Its compact form factor makes it easy to deploy in tight spaces, while also ensuring minimal intervention for maintenance.

In summary, the Patton Electronics 3231 is a powerful tool for organizations seeking to bridge the gap between legacy serial devices and contemporary Ethernet networks. With its robust feature set, advanced technologies, and commitment to security and reliability, it stands out as a preferred choice for businesses aiming to enhance their data communication capabilities.