Patton electronic 07M6070-UM user manual Important Thermal Note on System Usage

Page 3

Owner’s Record

The serial number of this product is located at the rear panel of your system. Refer to the model and serial number when you contact the factory for services.

IMPORTANT THERMAL NOTE ON SYSTEM USAGE:

This is a fanless system, so it must be properly mounted to allow for proper cooling. Be sure to use the metal stand to hold the system upright with blue LED on top, or to mount the system at least 1 or 2 inches away from the flat side surfaces of the system. This will help keep the system cool and within thermal operating limits.

Do not leave the system turned on and lying flat on its side. This blocks the air flow through the vents.

Patton suggests keeping the system cool by using the suspend or sleep features of the NanoServ™.

SAFETY WHEN WORKING WITH ELECTRICITY

•To prevent shock or fire hazard, do not expose your NanoServ™ to rain or moisture.

WARNING • Never install your NanoServ™ in wet locations.

•To avoid electrical shock, do not open the case. Contact the factory offices for qualified personnel servicing.

•Never touch un-insulated terminals or wire unless your power adaptor and display monitor are disconnected.

•When using the system, avoid using or installing the modem to the serial port during a storm or lightning.

•Do not use the modem or a telephone to report a gas leak in the vicinity of the leak.

•USB cables are not supplied.

This device contains no user serviceable parts. The equipment shall be returned to Patton Electronics for repairs, or repaired by qualified service per- sonnel.

The external power adapter shall be a listed Limited Power Source. Ensure that the power cable used with this device meets all applicable standards for the country in which it is to be installed, and that it is connected to a wall out- let which has earth ground. The mains outlet that is utilized to power the devise shall be within 10 feet (3 meters) of the device, shall be easily acces- sible, and protected by a circuit breaker.

Page 2 Page 4
Image 3
Page 2 Page 4
Contents NanoServ Mailsupport@patton.com Important Thermal Note on System Usage Page Table of Contents Factory Defaults Check before use Unpacking Your NanoServ SystemGeneral Information NanoServ System NanoServ System OverviewNanoServ System Overview Front panel Ultra-Thin System OverviewThin System Front panel Thin System OverviewPeripherals Introduction Connecting the monitorConnecting the USB Connecting the USBConnecting to the Internet/Intranet USB PortSpeaker/Earphone Connecting the keyboard and mouse Describing Mouse Actions DescriptionDescribing the Keyboard Printer port Connecting the Printer PortConnecting the power adaptor Power AdaptorTurning On Your NanoServ Bios Reconfiguring the system Bios setupTaking Care Of Your NanoServ Storing Cleaning your NanoServ Using cables for connectionTroubleshooting NanoServ does not start Troubleshooting your systemOperating System Not Found Contacting Patton for assistance Patton support headquarters in the USA Contact informationRMA numbers Appendix a Factory Defaults Fedora Core 5 Install Defaults Bios DefaultsAppendix B Specifications Compliance Radio and TV interferenceCE Declaration of Conformity System Specifications Technical Specifications Features DescriptionNanoServ 6070 Series Model NumbersAppendix C NanoServ System Connectors Rear Connectors Outline for the Ultra-Thin System NanoServ System Connectors SummaryUSB VGA Rear Connectors Outline for the Thin SystemTX+ RX+ LED1 LED0 VCC Pin AssignmentsMIC LINE-OUT Leds Power ON/OFF & HDD R/W

07M6070-UM specifications

The Patton Electronics 07M6070-UM is a versatile and robust solution designed for efficient communication and data exchange in various applications. This device is part of Patton's line of advanced networking equipment, which aims to enhance connectivity and reliability in both enterprise and industrial environments.

One of the standout features of the 07M6070-UM is its ability to support multiple communication protocols, making it an adaptable choice for different networking needs. It incorporates both Serial and Ethernet interfaces, allowing users to seamlessly connect legacy serial devices to modern Ethernet networks. This flexibility makes it particularly useful in environments where both old and new technologies must coexist.

In terms of performance, the 07M6070-UM is equipped with advanced data processing capabilities that ensure efficient handling of data packets. The device supports high-speed data transmission, enhancing overall network performance while minimizing latency. This is crucial for applications that require real-time data exchange, such as in manufacturing or telecommunications sectors.

The 07M6070-UM also features robust security protocols, ensuring that sensitive information remains protected during transmission. It includes options for encryption and secure access controls, addressing growing concerns over cybersecurity in modern networking environments. This focus on security is essential for businesses that handle confidential data.

Another important characteristic of the 07M6070-UM is its user-friendly interface. The device is designed for easy installation and configuration, with intuitive controls and indicators that allow users to monitor performance and troubleshoot issues effectively. This simplifies maintenance and reduces downtime, contributing to operational efficiency.

Moreover, the 07M6070-UM is built to withstand harsh conditions, making it suitable for industrial settings. Its durable construction protects against environmental factors such as dust, moisture, and temperature fluctuations. This reliability ensures that the device can operate continuously, even in challenging conditions.

In summary, the Patton Electronics 07M6070-UM is a powerful communication device that combines versatility, performance, and security. With its support for multiple protocols, high-speed data handling, robust security features, user-friendly interface, and durable design, it is an ideal choice for organizations looking to enhance their networking capabilities. Whether in industrial applications or enterprise environments, the 07M6070-UM represents a significant step forward in reliable and efficient communication technology.
Top Page Image Contents