Patton electronic 2703 user manual Jumper Summary Table

Page 6

The internal jumpers mounted on the Model 2703’s PC board

(labeled LK1 - LK7) are used to configure the 75 ohm or 120 ohm net- work link parameters. Figure 4 (above) shows the location of the Model 2703’s jumpers on the internal PC board.

The table below shows the factory default jumper settings. Following the table are descriptions for each jumper.

NOTE: One combination of jumper settings is required for 75 ohm operation, and another combination is required for 120 ohm opera- tion. The Model 2703 is factory configured for 75 ohm operation.)

JUMPER SUMMARY TABLE

Jumper

Function

75 ohm

120 ohm

Factory Default

 

 

 

 

 

LK1

75 Ohm TX Shield to GND

On

Off

On (connect)

 

 

 

 

 

LK2

75 Ohm RX Shield to GND

Opt.*

Off

Off (disconnect)

 

 

 

 

 

LK3

Reserved

Off

Off

Off

 

 

 

 

 

LK4

120 Ohm Shield to GND

Off

Opt.

Off (disconnect)

 

 

 

 

 

LK5

Configuration Auto-Sense

On

Opt.

On (enabled)

 

 

 

 

 

LK6

75 Ohm Input Impedance

On

Off

} On (75 Ohm)

LK7

75 Ohm Input Impedance

On

Off

 

 

 

 

 

*Opt. = optional setting, all others are required for proper operation

Jumper LK1: 75 Ohm Transmit Shield-to-Ground Connection

This setting determines whether the shield of the 75 Ohm (coax) transmit cable is connected to earth ground. This connection must be made when operating in 75 Ohm (unbalanced) mode. Conversely, this connection must not be made when operating in 120 Ohm (balanced) mode.

LK1

Setting

Strap On

75

Ohm TX Shield-to-GND Connection Made

Strap Off

75

Ohm TX Shield-to-GND Connection Broken

Jumper LK2: 75 Ohm Receive Shield-to-Ground Connection

This setting determines whether the shield of the 75 Ohm (coax) receive cable is connected to earth ground. This connection is optional when operating in 75 Ohm (unbalanced) mode. This connection must not be made when operating in 120 Ohm (balanced) mode.

LK2

Setting

Strap On

75

Ohm RX Shield-to-GND Connection Made

Strap Off

75

Ohm RX Shield-to-GND Connection Broken

Jumper LK3: Reserved for Future Use

This strap is reserved for future use and must remain Off.

LK3

Setting

Strap On

Not a Valid Setting

Strap Off

Normal Operation

Jumper LK4: 120 Ohm Shield-to-Ground Connection

This setting determines whether the shield of the 120 Ohm (modu- lar) cable is connected to earth ground. This connection is optional when operating in 120 Ohm (balanced) mode. This connection must not be made when operating in 75 Ohm (unbalanced) mode.

LK4

Setting

Strap On

75

Ohm RX Shield-to-GND Connection Made

Strap Off

75

Ohm RX Shield-to-GND Connection Broken

Jumper LK5: Configuration Auto-Sense

This setting determines whether the host can automatically sense the configuration of the Applique. The operation of the Applique is not affected by this jumper setting. Auto-sense should be enabled when operating in 75 Ohm (unbalanced) mode. Current interface standards do not list this feature for 120 Ohm (balanced) mode.

LK5

Setting

Strap On

Auto-sense enabled

Strap Off

Auto-sense disabled

9

10

Image 6
Contents User Manual CE Notice ServiceRadio and TV Interference Tel 301Features External DIP Switch SettingsDescription Switch S1-6 Data Inversion Switch Set S1Switches S1-4 and S1-5 Rate Adaptation Switch S1-7 Master/Slave ClockInternal Jumper Settings Switch S1-8 Loopback Test EnableSwitch Set S2 To be Used in Conjunction with S1-1 S2 Summary TableJumper Summary Table Connection to the G.703 Network Power Supply OptionsSignal Twisted Pair 120 OHM ConnectionLED Status Indicators Connection to the Power SourcePOWER-UP Connection to the Terminal DevicePatton Model 2703 Specifications Loopback Test LALPatton Model 2703 PIN Configurations Factory Parts and AccessoriesSafety Warnings and Requirements Terminal DTE Interface CablesPatton Part Number

2703 specifications

The Patton Electronic 2703 is a versatile digital to analog converter (DAC) that is designed to enhance audio experiences for both enthusiasts and professionals. This device is renowned for its high performance, delivering an impressive sound quality that meets the demands of various applications, from home audio systems to studio environments.

One of the main features of the Patton Electronic 2703 is its advanced audio processing technology. It utilizes high-resolution audio sampling, supporting formats up to 24-bit/192kHz, which significantly improves the clarity and richness of sound reproduction. This capability allows users to enjoy music with detailed nuances, providing an immersive listening experience.

Another key characteristic of the 2703 is its robust connectivity options. The unit is equipped with multiple input and output options, including USB, optical, and coaxial connections. This flexibility allows it to integrate seamlessly with a wide range of audio sources and devices, making it an ideal choice for users who require versatility in their audio setups.

The design of the Patton Electronic 2703 is both functional and aesthetically pleasing. Its compact form factor makes it easy to incorporate into any audio system without taking up excessive space. Moreover, the device is built to last, featuring high-quality components that ensure longevity and reliability.

In addition to its impressive technical specifications, the 2703 offers user-friendly controls. The front panel includes intuitive buttons for volume adjustment, as well as indicator lights that provide information on the current input signal and operational status. This design consideration ensures that users can easily navigate the device’s features without confusion.

Another significant advantage of the Patton Electronic 2703 is its ability to reduce distortion and enhance signal integrity. This is accomplished through its high-quality digital filters and advanced clock synchronization technology, which minimizes jitter and maintains a clean audio signal.

In conclusion, the Patton Electronic 2703 stands out as a premier choice for anyone seeking a reliable and high-performance digital to analog converter. Its combination of superior sound quality, versatile connectivity, durable construction, and user-friendly design makes it an essential tool for audio professionals and audiophiles alike. Whether you are enhancing your home audio setup or working in a professional studio, the 2703 is engineered to deliver an exceptional audio experience that meets and exceeds expectations.