Patton electronic EHA3201 quick start Connecting Power

1

2

3

4

5

6

7

8

1 TX+ (data output from the G.SHDSL router)

2 TX- (data output from the G.SHDSL router)

3 RX+ (data input to the G.SHDSL router)

4 (no connection)

5 (no connection)

6 RX- (data input to the G.SHDSL router)

7 (no connection)

8 (no connection)

Figure 3. EnviroNET G.SHDSL Router 10/100Base-T RJ-45 Connector Pinout

1.4 Connecting Power

The EHA3201 is an internally powered unit. The power connection is made via the 3-pin power connector on the bottom panel of the EnviroNET G.SHDSL Router. A mating connector is provided to create the mating cable (see figure 4). No configuration is necessary for the power supply.

EHA3201/R/UI

L NN L

EE

L = Line

N = Neutral

E = EarthL = +24

EHA3201/R/24

N = Ground

L NN L

Figure 4. Connecting the power cable

The EnviroNET G.SHDSL Router does not have a power switch, so it powers up as soon as it is plugged in.

	There are no user-serviceable parts in the EnviroNET G.SHDSL
	Router. Fuse replacement should only be performed by qualified
	service personnel. Contact Patton Electronics Technical support at
WARNING	(301) 975-1007 for more information.

EHA3201 Quick Start Guide 5