Device Not Working

Can I use the mini hub without the AC power adapter?

No, you must use the supplied AC power adapter to ensure that the devices work properly.

•Make sure that the device is firmly connected to the port on the mini hub.

•Plug the device into a different port on the mini hub. If it still doesn’t work, test the device by connecting it directly to your computer.

•Check that you ran the Setup or Install program for the device.

•Make sure that the device appears in Device Manager. See “Verifying Device is Installed” below.

•Disconnect all devices from the mini hub and reconnect them, one at a time. Check that each device works before plugging in the next one.

To check that the mini hub is installed properly, use Device Manager to locate the Generic USB Hub on USB 2.0 Bus device.

To access Device Manager for the Windows® 98/Me operating system, right-click My Computer, Properties, and then click the Device Manager tab.

For the Windows® 2000/XP operating system, right-click My Computer, Properties, click the Hardware tab, then click the Device Manager button.