Targus Wireless Multimedia Presenter with Trackball
Windows®2000/XP & Windows Vista™
The Found New Hardware Wizard appears.
If it does not, the operating system has installed the default driver automatically. No othersteps are necessary.
5Click Next.The wizard searches for the appropriate device driver.
6Click Next, then Finish to complete the driver installation.
Establishing a Communications Link
After your computer detects the USB receiver and the driver software is installed, you mustestablish a communications link between the presenter and its receiver BEFORE you canuse the presenter.
Make sure that your computer is turned on and has detected the USB receiver before youestablish a communications link.
The light emitter diode (LED) illuminates to indicate your computer has detected the receiver.
1 Press and release the Connection button on the receiver.
Connection button
The receiver’s LED turns off.
2Press and release the Connection button, located on the bottom of the presenter.The receiver’s LED resumes glowing when the set up has been completed.
You are now ready to use the presenter.
6