Power / Fault Indicator
This light will flash (blue color) if the inverter encounters problems.
LED is ON – Normal operation. LED is flashing – Low voltage warning signal indicates the supply voltage is low.
LED is OFF – Unit is off and no power is being output. Either the inverter is not plugged into a powered socket or it has gone into protection mode due to overheating, overvoltage, overloading or short circuit.
USB Output
(DC power only)
Electrical Ratings:
Input:
AC Output: 120Vac 60 Hz (modified sinewave)
100W continuous (150W surge) USB Output: 5Vdc 500mA
Typical Usage
This listing is for reference purpose only. Some devices exceed the wattages listed. Before using the device, please refer to the owner’s manual for actual wattage required.
Play Station | 10 Watt |
Cellular Phone Charger | 25 Watt |
Portable Color Printer | 30 Watt |
40 Watt | |
13” color TV | 70 Watt |
Notebook computer | 50 Watt |
CD player | 85 Watt |
Work Light | 100 Watt |
WARNINGS
Any electric appliance with the power consump- tion beyond 100W is not allowed for usage.This inverter is not recommended for use with inductive loads, such as fluorescent lamps or pumps and most heat generation equipment such as hair dryers, coffee makers, irons, heaters and toasters. Otherwise, permanent damage to the unit and excessive overheating may result.
100W Auto/Air®
Mobile Power Inverter
Slimline Style
Ventilation openings
WARNING
•Do not block or cover any louvered vents . Place the inverter on a flat surface with good ventilation between
•Do not place the inverter on or near a heating vent or any piece of heat generating equipment. Keep inverter away from direct sunlight, if at all possible.
•Do not allow water or other liquids to come into
contact with the inverter.
AC output
Fuse
CAUTIONS
This inverter is fitted with a spade type 32Vdc 15A fuse. Once the fuse blows, replace with a same specification and type fuse. Usage of another type fuse or metal wire will cause abnormal overheating or even fire hazards.
Note: When replacing the fuse, please make sure that all the electrical device(s) are turned off and the power cables are unplugged. Make sure the fuse is replaced correctly and before reconnecting the device(s).
Hypertronics to CLA auto/air adapter
DC
DC
http://www.targus.com/
Press
DC
auto
DC
air
WARNINGS
If the external cable of this inverter is damaged, stop using this and contact the authorized agent to replace it to avoid hazard.
CAUTIONS
Regularly check input and output connections are tight. Loose connections can generate harmful heat and / or damage the inverter or power source. Prevent shock hazard.
Quick Start Guide
Features and specifications subject to change without notice. © 2006, Targus Group International, Inc. and Targus, Inc., Anaheim, CA 92806 USA. | APV10US / |