Advanced | TP-Link TL-WN751ND instruction

TL-WN751ND

150Mbps Wireless N PCI Adapter

Figure 4-5

4.2Advanced

The following configurations can be made on the Advanced page:

1)To select wireless configuration tool.

Here you can decide which tool to use, either the TP-LINK Configuration Utility or the Windows wireless configuration tool. This option is available only in Windows XP.

2)To switch to another wireless network adapter.

Here you can switch to another adapter installed in your computer. The adapters successfully installed in your computer will be listed in the drop-down menu if the adapters are supported by this utility.

3)To switch to SoftAP mode.

Once enabled, the adapter will be able to work as an AP. This option is only available in Windows 7.

4)To change the power save mode. The default option is ON.

Figure 4-6