Chapter 2 Installation
2.1Hardware Installation
1.Connect one end of the USB cable to the Adapter.
2.Connect the other end of the USB cable to the USB port on your computer. Because the Adapter gets its power from the host, there is no external power supply. The LED should light up when the Adapter is plugged in and the PC is on.
)Note:
The Found New Hardware Wizard screen will pop up when the adapter is installed correctly. Click Cancel.
2.2Software Installation
The adapter’s Setup Wizard will guide you through the installation procedures for Windows 7, Windows Vista, and Windows XP. The procedures in different systems are quite similar, therefore here takes the procedures in Windows 7 for example.
1.Insert the Resource CD into your
4