TP-Link TL-WN8200ND manual Connect to a Wireless Network, To connect using Twcu

TL-WN8200ND300Mbps High Power Wireless USB Adapter

Chapter 3 Connect to a Wireless Network

With both the hardware and software successfully installed into your computer, you can quickly connect to a wireless network using one of the following methods.

¾Method One:

To connect using TWCU (TP-LINK Wireless Configuration Utility)

TL-WN8200ND uses the TP-LINK Wireless Configuration Utility as the management software. The utility provides you an easy interface to connect to a network and to change any settings related to the wireless adapter.

¾Method Two:

To connect using WPS

By this method, you can connect to your network quickly on the condition that your router or access point supports WPS as is called by some other brands.

¾Method Three:

To connect using Windows built-in wireless utility

Windows users may use the built-in wireless utility to connect to a wireless network. For specific operations, please go to To connect using Windows built-in wireless utility.

3.1To connect using TWCU

1.After installation, the utility configuration page will automatically pop up on the screen. If the utility page does not pop up, you can also launch the utility by double-clicking on the icon on your desktop or the icon in your system tray.

Figure 3-1

2.The Network page will display all wireless networks that are available in your area. To connect to a network, simply highlight the wireless network name (SSID) and click

9