Chapter 3 Configuration
3.1 Configuration of Utility
The configuration steps in Windows 2000/ XP/ Vista are similar. For the configurations in Windows 2000/ Vista, please refer to the instructions in Windows XP.
After the Adapter's driver and utility has been installed, the adapter’s tray icon, or , will appear in your system tray. It means the utility is running on your system. If the utility does not run, you can run the utility by clicking: Start> All programs>
Icon means the connection has been established. Icon means there is no connection.
¾Display current status information
¾Edit and add configured profiles
¾Display current diagnostics information
)Note:
If your OS is Windows XP, you can use Windows XP to configure the wireless network settings. (To use this function, you must upgrade the OS with sp2).
If you want to use Windows XP to configure wireless network settings, just
at the bottom of the screen, and click Use Zero Configuration as Configuration utility to switch the utility.
3.1.1 Profile
Click the Profile tab of the utility and the Profile screen will appear as Figure
¾Add a Profile
¾Edit a profile
¾Delete a profile
¾Activate a profile
- 10 -