TP-Link manual TL-WN510G/TL-WN550G/TL-WN551G 54M Wireless Adapter User Guide

Page 17

TL-WN510G/TL-WN550G/TL-WN551G54M Wireless Adapter User Guide

Figure 3-4 General Tab of Profile Management

2.Edit the Security tab

Edit the fields in the Security tab of Profile Management to configure the profile. To define the security mode, select the radio button of the desired security mode.

¾WPA/WPA2: Wi-Fi Protected Access

¾WPA/WPA2 Passphrase: Wi-Fi Protected Access Passphrase

¾802.1x: Enables 802.1x security.

¾Shared Key (Static WEP): Enables the use of shared keys that are defined on both the access point and the station. To define shared encryption keys, choose the Shared Key radio button and click Configure to fill in the Define Shared Keys window.

None: No security (not recommended).

Note: If the access point that the wireless adapter is associating to has WEP set to Optional and the client has WEP enabled, make sure that Allow Association to Mixed Cells is checked on the Security Tab to allow association. To complete WEP encryption configuration, you must select the 802.11 Authentication Mode as appropriate on the Advanced tab of this Profile Management dialog.

Figure 3-5 Security tab of Profile Management

- 12 -

Image 17

Contents Page COPYRIGHT & TRADEMARKS FCC RF Radiation Exposure Statement FCC STATEMENTCE Declaration of Conformity ¾ EN 301 489-1 V.1.4.1 2002 / EN 301 489-17 V.1.2.1 ¾ EN 60950-1 ¾ EN 300 328 V.1.4.1Overview of the product TL-WN510G/TL-WN550G/TL-WN551G 54M Wireless Adapter User Guide Package Contents1.1 Overview of the product 1.2 FeaturesChapter 1 Introduction 1.3.2 TL-WN550G/TL-WN551G LED Indications 1.3 LED Status1.3.1 TL-WN510G LED Indications 2.1 Hardware Installation Chapter 2 Installation Guide2.2 Software Installation 2.1.1 TL-WN550G/TL-WN551G Hardware InstallationFigure 2-1 TP-LINK Wireless Client Utility - Install Shield Wizard Figure 2-3 Select the setup type Figure 2-6 Select a Program Folder Figure 2-9 Finish Figure 2-8a Windows XP Warning Box3.1 Current Status Chapter 3 ConfigurationFigure 3-1 Current Status 3.2 Profile Management 3.2.1 Add or Modify a Configuration ProfileFigure 3-4 General Tab of Profile Management 2. Edit the Security tab ¾ Power Save Mode 3. Click Activate 3.2.4 Import a Profile 3.2.3 Switch another Profile3.2.2 Remove a profile 3.2.6 Scan Available Networks 3.2.5 Export a Profile3.2.7 Auto Profile Selection Management 3.3.1 Check Driver Information 3.3 Diagnostics3.3.2 Check Receive and Transmit Statistical Information Environmental and Physical Appendix A SpecificationsNormal Appendix B Glossary infrastructure mode, the wireless devices communicate with each other and to a wired network by first going through an access point. An infrastructure wireless network connected to a wired network is referred to as a Basic Service Set BSS. A set of two or more BSS in a single network is referred to as an Extended Service Set ESS. Infrastructure mode is useful at a corporation scale, or when it is necessary to connect the wired and wireless networks E-mail support@tp-link.com Appendix C Contact Information