TP-Link TL-WN510G, TL-WN551G, TL-WN550G manual Auto Profile Selection Management

Page 21

TL-WN510G/TL-WN550G/TL-WN551G54M Wireless Adapter User Guide

Figure 3-10 Scan Available Networks Dialog

3.2.7 Auto Profile Selection Management

The auto selection feature allows the wireless adapter to automatically select a profile from the list of profiles and use it to connect to the network. To add a new profile into the Auto Selected Profiles list, please follow these steps.

1.On the Profile Management tab, click Order Profiles….

2.The Auto Profiles Selection management window will appear, with a list of all created profiles in the Available Profiles box.

3.Highlight the profiles to add to auto profile selection, and click Add. The profile will appear in the Auto Selected Profiles box.

4.Highlight a profile in the Auto Selected Profiles box.

5.Click Move Up or Move Down as appropriate. Note: The first profile in the Auto Selected Profiles box has highest priority, and the last profile has lowest priority.

6.Click OK.

7.Check the Auto Select Profiles checkbox on the Profile Management tab.

Note: When auto profile selection is enabled by checking Auto Select Profiles on the Profile Management tab, the client adapter will scan for an available network. The profile with the highest priority and the same SSID as one of the found networks will be used to connect to the network. If the connection fails, the client adapter will try the next highest priority profile that matches the SSID until an available network is found.

- 16 -

Image 21

Contents Page COPYRIGHT & TRADEMARKS FCC STATEMENT CE Declaration of ConformityFCC RF Radiation Exposure Statement ¾ EN 301 489-1 V.1.4.1 2002 / EN 301 489-17 V.1.2.1 ¾ EN 60950-1 ¾ EN 300 328 V.1.4.1Overview of the product TL-WN510G/TL-WN550G/TL-WN551G 54M Wireless Adapter User Guide Package Contents1.2 Features Chapter 1 Introduction1.1 Overview of the product 1.3 LED Status 1.3.1 TL-WN510G LED Indications1.3.2 TL-WN550G/TL-WN551G LED Indications 2.1 Hardware Installation Chapter 2 Installation Guide2.2 Software Installation 2.1.1 TL-WN550G/TL-WN551G Hardware InstallationFigure 2-1 TP-LINK Wireless Client Utility - Install Shield Wizard Figure 2-3 Select the setup type Figure 2-6 Select a Program Folder Figure 2-9 Finish Figure 2-8a Windows XP Warning Box3.1 Current Status Chapter 3 ConfigurationFigure 3-1 Current Status 3.2 Profile Management 3.2.1 Add or Modify a Configuration ProfileFigure 3-4 General Tab of Profile Management 2. Edit the Security tab ¾ Power Save Mode 3.2.3 Switch another Profile 3.2.2 Remove a profile3. Click Activate 3.2.4 Import a Profile 3.2.6 Scan Available Networks 3.2.5 Export a Profile3.2.7 Auto Profile Selection Management 3.3.1 Check Driver Information 3.3 Diagnostics3.3.2 Check Receive and Transmit Statistical Information Appendix A Specifications NormalEnvironmental and Physical Appendix B Glossary infrastructure mode, the wireless devices communicate with each other and to a wired network by first going through an access point. An infrastructure wireless network connected to a wired network is referred to as a Basic Service Set BSS. A set of two or more BSS in a single network is referred to as an Extended Service Set ESS. Infrastructure mode is useful at a corporation scale, or when it is necessary to connect the wired and wireless networks E-mail support@tp-link.com Appendix C Contact Information