Philips HES4900 Adjust settings, General setup, Switch to standby mode, Unlock Play all discs

7 Adjust settings

1Press OPTIONS.

2Select a setup page.

3Select an option and then press .

4Select a setting and then press OK.

•To return to the previous menu, press

.

•To exit the menu, press OPTIONS.

General setup

On [General Setup Page], you can set the following options:

[Disc Lock]

Set play restriction for specifi c discs. Before you start, place the disc in the disc compartment (maximum 40 discs can be locked).

•[Lock] – Restrict access to the current disc.You need to enter a password to unlock and play the disc.

•[Unlock] – Play all discs.

Tip

• To set or change the password, go to [Preference

Setup] > [Password].

[OSD Language]

Select the preferred language for on-screen display.

This unit supports Philips EasyLink, which uses the HDMI CEC (Consumer Electronics Control) protocol. EasyLink-compliant devices that are connected through HDMI connectors can be controlled by a single remote control.

		Note	English
•	Philips does not guarantee 100% interoperability with
	all HDMI CEC devices.

[EasyLink]

•[Auto Wakeup TV] -Turn on or off one touch play.

•[System Standby] -Turn on or off one touch power-off.

•[System Audio Control] -Turn on or off one touch audio play.

[Display Dim]

Turn on or off adjustment of display brightness level.

[Screen Saver]

The screen saver protects theTV screen damage due to prolonged exposure to a static image.

•[On] – Enable the screen saver.

•[Off] – Disable the screen saver.

[Sleep Timer]

Switches to standby automatically after the preset time.

•[15 mins], [30 mins], [45 mins], [60 mins] – select the count down time before the apparatus switches to standby.

•[Off] – disable sleep mode.

Switch to standby mode

[Standby Mode]

Set the standby mode.

•[Normal] - power consumption <4W.

•[Low Power] - power consumption <1W. However, it requires longer time to power up.

[DivX(R)VOD Code]

Display the DivX® registration code.

EN 25