TP-Link TL-WR741ND manual 12 LAN

Page 41

TL-WR740N/TL-WR741ND150Mbps Wireless N Router

enter the number of minutes you want to have elapsed before your Internet connection terminates.

¾Connect Automatically - Connect automatically after the Router is disconnected. To use this option, click the radio button.

¾Connect Manually - You can configure the Router to make it connect or disconnect manually. After a specified period of inactivity (Max Idle Time), the Router will disconnect from your Internet connection, and you will not be able to re-establish your connection automatically as soon as you attempt to access the Internet again. To use this option, click the radio button. If you want your Internet connection to remain active at all times, enter "0" in the Max Idle Time field. Otherwise, enter the number in minutes that you wish to have the Internet connecting last unless a new link is requested.

Caution: Sometimes the connection cannot be disconnected although you specify a time to Max Idle Time, since some applications are visiting the Internet continually in the background.

)Note:

If you don't know how to choose the appropriate connection type, click the Detect button to allow the Router to automatically search your Internet connection for servers and protocols. The connection type will be reported when an active Internet service is successfully detected by the Router. This report is for your reference only. To make sure the connection type your ISP provides, please refer to the ISP. The various types of Internet connections that the Router can detect are as follows:

z

z

z

PPPoE - Connections which use PPPoE that requires a user name and password.

Dynamic IP - Connections which use dynamic IP address assignment.

Static IP - Connections which use static IP address assignment.

The Router can not detect PPTP/L2TP/BigPond connections with your ISP. If your ISP uses one of these protocols, then you must configure your connection manually.

4.5.2LAN

Choose menu “Network→LAN”, and then you can configure the IP parameters of the LAN on the screen as below.

Figure 4-12 LAN

-34-

Page 40 Page 42
Image 41
Page 40 Page 42
Contents TL-WR740N TL-WR741ND Copyright & Trademarks Country Restriction Reason/remark FCC RF Radiation Exposure StatementYang Hongliang Product Manager of International Business EN623112008EN620752008 Contents TL-WR740N/TL-WR741ND 104 100103 Package Contents Simple Installation Flexible Access ControlOverview of the Router Incredible SpeedConventions Main FeaturesName Status Indication Panel LayoutFront Panel Rear Panel ¾ ResetSystem Requirements Installation Environment RequirementsConnecting the Router TL-WR740N/TL-WR741ND150Mbps Wireless N Router TCP/IP Configuration Quick Installation GuidePlease check the connection following these steps Quick Installation Guide3Login the Router Choose WAN Connection Type Quick Setup MAC Clone 10 Quick Setup Static IP PSK Password You can enter Ascii or Hexadecimal characters -12.Click the Finish button to finish the Quick Setup Status LoginRouter Status Quick SetupMethod One QSSBy PBC Method Two QSS Configuration Screen of Wireless Adapter Add a New Device Method ThreeII. By PIN Next TL-WR740N/TL-WR741ND150Mbps Wireless N Router 1 WAN NetworkWAN Static IP WAN PPPoE TL-WR740N/TL-WR741ND150Mbps Wireless N Router PPPoE Advanced Settings WAN BigPond Cable NSW / ACT nsw.bigpond.net.au10 WAN -L2TP TL-WR740N/TL-WR741ND150Mbps Wireless N Router 11 WAN -PPTP 12 LAN 2 LAN13 MAC Address Clone MAC CloneWireless Settings WirelessTL-WR740N/TL-WR741ND150Mbps Wireless N Router Wireless Security TL-WR740N/TL-WR741ND150Mbps Wireless N Router Encryption You can select either Automatic, or Tkip or AES Wireless MAC Filtering 20 Wireless MAC address Filtering To modify or delete an existing entry Wireless Advanced Wireless Statistics Dhcp Dhcp Settings26 Dhcp Clients List Dhcp Clients ListTo Reserve IP addresses Address ReservationVirtual Servers Forwarding46 Add or Modify a Virtual Server Entry To setup a virtual server entryTo add a new rule, follow the steps below Port Triggering48 Add or Modify a Triggering Entry Once the Router is configured, the operation is as followsTo assign a computer or server to be a DMZ server 3 DMZUPnP Security 50 UPnP Setting52 Basic Security Basic SecurityAdvanced Security TL-WR740N/TL-WR741ND150Mbps Wireless N Router 54 Local Management Local Management55 Remote Management Remote ManagementTo add a new entry, please follow the steps below Parental Control57 Add or Modify Parental Control Entry TL-WR740N/TL-WR741ND150Mbps Wireless N Router Rule Access ControlThere are two methods to add a new rule Method One 61 Quick Setup Create a Host EntryTL-WR740N/TL-WR741ND150Mbps Wireless N Router TL-WR740N/TL-WR741ND150Mbps Wireless N Router Method Two 65 Add Internet Access Control Entry Host 66 Host Settings68 Add or Modify a Host Entry Target70 Add or Modify an Access Target Entry Schedule 72 Schedule SettingsTo add a new schedule, follow the steps below 73 Advanced Schedule SettingsTo add static routing entries Advanced RoutingStatic Routing List System Routing Table Other configurations for the entriesBandwidth Control Control Settings80 Bandwidth Control Rules List Rules ListBinding Settings 14 IP & MAC Binding SettingTo find an existing entry, follow the steps below To add IP & MAC Binding entries, follow the steps belowARP List Dynamic DNSComexe.cn Ddns To set up for DDNS, follow these instructionsDyndns.org Ddns 88 Dyndns.org Ddns Settings90 The System Tools menu System Tools91 Time settings Time SettingTo set time manually DiagnosticTo set time automatically To set Daylight SavingTL-WR740N/TL-WR741ND150Mbps Wireless N Router 94 Diagnostic Results Firmware UpgradeBackup & Restore Factory Defaults97 Backup & Restore Configuration RebootSystem Log Password100 System Log Statistics 102 Statistics UDP Tx Statistics TableAppendix a FAQ Figure A-3 MAC Clone Want to use Netmeeting, what do I need to do?Figure A-5 Add or Modify a Virtual server Entry Want to build a WEB Server on the LAN, what should I do? Figure A-7 Basic SecurityFigure A-9 Virtual Servers Wireless stations cannot connect to the RouterYour wireless stations Install TCP/IP component Appendix B Configuring the PCsFigure B-2 Figure B-3 Environmental and Physical WirelessGeneral Appendix D Glossary 106

TL-WR741ND specifications

The TP-Link TL-WR741ND is a versatile wireless router that serves as an ideal networking solution for home and small office environments. Offering a blend of performance, reliability, and affordability, this router has garnered attention for its user-friendly design and solid feature set.

One of the main features of the TL-WR741ND is its compliance with the IEEE 802.11n wireless standard, which allows for wireless speeds of up to 150Mbps. This speed is suitable for a variety of online activities, including web browsing, email, video streaming, and online gaming. The router is also backward compatible with earlier Wi-Fi standards, including IEEE 802.11b/g, ensuring connectivity for a wide range of devices.

With its 2.4GHz frequency band, the TL-WR741ND provides excellent coverage and penetration through walls and obstacles, making it a great option for larger homes or offices. The router incorporates three 5dBi detachable antennas, which significantly enhance the wireless signal strength and coverage area, ensuring that all users can enjoy a stable connection.

Another noteworthy characteristic of the TL-WR741ND is its simple setup process. Users can easily configure the router using the web-based interface, which provides step-by-step instructions for installation. The One-Touch Wireless Security button allows for quick encryption, providing users with the security necessary to protect their data from unauthorized access.

The TP-Link TL-WR741ND also features an integrated NAT firewall and advanced security options such as WEP, WPA/WPA2, and MAC address filtering. These security features work together to create a robust defense against potential threats and unauthorized users, allowing users to browse the internet safely.

Additionally, the router includes four 10/100Mbps LAN ports for wired connections, enabling reliable performance for devices that require a stable internet connection, such as gaming consoles or desktop PCs. The device also supports dynamic IP, static IP, and PPPoE WAN connection types, making it versatile for different internet service providers.

In conclusion, the TP-Link TL-WR741ND offers a compelling mix of performance, features, and user-friendly design. With its strong wireless coverage, simple setup, and solid security options, it remains an excellent choice for anyone looking to enhance their home or small office networking experience.
Top Page Image Contents