TP-Link manual TL-WR740N/TL-WR741ND150Mbps Wireless N Router

Page 44

TL-WR740N/TL-WR741ND150Mbps Wireless N Router

¾Region - Select your region from the drop-down list. This field specifies the region where the wireless function of the Router can be used. It may be illegal to use the wireless function of the Router in a region other than one of those specified in this field. If your country or region is not listed, please contact your local government agency for assistance.

When you select your local region from the drop-down list, click the Save button, and then the Note Dialog will appear. Click OK.

Note Dialog

)Note:

Limited by local law regulations, version for North America does not have region selection option.

¾Channel - This field determines which operating frequency will be used. The default channel is set to Auto, so the AP will choose the best channel automatically. It is not necessary to change the wireless channel unless you notice interference problems with another nearby access point.

¾Mode - Select the desired mode. The default setting is 11bgn mixed.

11b only - Select if all of your wireless clients are 802.11b.

11g only - Select if all of your wireless clients are 802.11g.

11n only- Select only if all of your wireless clients are 802.11n.

11bg mixed - Select if you are using both 802.11b and 802.11g wireless clients. 11bgn mixed - Select if you are using a mix of 802.11b, 11g, and 11n wireless clients.

Select the desired wireless mode. When 802.11g mode is selected, only 802.11g wireless stations can connect to the Router. When 802.11n mode is selected, only 802.11n wireless stations can connect to the AP. It is strongly recommended that you set the Mode to 802.11b&g&n, and all of 802.11b, 802.11g, and 802.11n wireless stations can connect to the Router.

¾Channel width - Select any channel width from the drop-down list. The default setting is automatic, which can automatically adjust the channel width for your clients.

) Note:

If 11b only, 11g only, or 11bg mixed is selected in the Mode field, the Channel Width selecting field will turn grey and the value will become 20M, which is unable to be changed.

¾Max Tx Rate - You can limit the maximum tx rate of the Router through this field.

¾Enable Wireless Router Radio - The wireless radio of this Router can be enabled or

-37-

Page 43 Page 45
Image 44
Page 43 Page 45
Contents TL-WR740N TL-WR741ND Copyright & Trademarks FCC RF Radiation Exposure Statement Country Restriction Reason/remarkYang Hongliang Product Manager of International Business EN623112008EN620752008 Contents TL-WR740N/TL-WR741ND 104 100103 Package Contents Flexible Access Control Simple InstallationOverview of the Router Incredible SpeedMain Features ConventionsName Status Indication Panel LayoutFront Panel ¾ Reset Rear PanelSystem Requirements Installation Environment RequirementsConnecting the Router TL-WR740N/TL-WR741ND150Mbps Wireless N Router Quick Installation Guide TCP/IP ConfigurationQuick Installation Guide Please check the connection following these steps3Login the Router Choose WAN Connection Type Quick Setup MAC Clone 10 Quick Setup Static IP PSK Password You can enter Ascii or Hexadecimal characters -12.Click the Finish button to finish the Quick Setup Login StatusQuick Setup Router StatusMethod One QSSBy PBC Method Two QSS Configuration Screen of Wireless Adapter Method Three Add a New DeviceII. By PIN Next TL-WR740N/TL-WR741ND150Mbps Wireless N Router Network 1 WANWAN Static IP WAN PPPoE TL-WR740N/TL-WR741ND150Mbps Wireless N Router PPPoE Advanced Settings NSW / ACT nsw.bigpond.net.au WAN BigPond Cable10 WAN -L2TP TL-WR740N/TL-WR741ND150Mbps Wireless N Router 11 WAN -PPTP 2 LAN 12 LANMAC Clone 13 MAC Address CloneWireless Wireless SettingsTL-WR740N/TL-WR741ND150Mbps Wireless N Router Wireless Security TL-WR740N/TL-WR741ND150Mbps Wireless N Router Encryption You can select either Automatic, or Tkip or AES Wireless MAC Filtering 20 Wireless MAC address Filtering To modify or delete an existing entry Wireless Advanced Wireless Statistics Dhcp Settings DhcpDhcp Clients List 26 Dhcp Clients ListAddress Reservation To Reserve IP addressesForwarding Virtual ServersTo setup a virtual server entry 46 Add or Modify a Virtual Server EntryPort Triggering To add a new rule, follow the steps belowOnce the Router is configured, the operation is as follows 48 Add or Modify a Triggering EntryTo assign a computer or server to be a DMZ server 3 DMZUPnP 50 UPnP Setting SecurityBasic Security 52 Basic SecurityAdvanced Security TL-WR740N/TL-WR741ND150Mbps Wireless N Router Local Management 54 Local ManagementRemote Management 55 Remote ManagementParental Control To add a new entry, please follow the steps below57 Add or Modify Parental Control Entry TL-WR740N/TL-WR741ND150Mbps Wireless N Router Access Control Rule61 Quick Setup Create a Host Entry There are two methods to add a new rule Method OneTL-WR740N/TL-WR741ND150Mbps Wireless N Router TL-WR740N/TL-WR741ND150Mbps Wireless N Router Method Two 65 Add Internet Access Control Entry 66 Host Settings HostTarget 68 Add or Modify a Host Entry70 Add or Modify an Access Target Entry 72 Schedule Settings Schedule73 Advanced Schedule Settings To add a new schedule, follow the steps belowTo add static routing entries Advanced RoutingStatic Routing List Other configurations for the entries System Routing TableControl Settings Bandwidth ControlRules List 80 Bandwidth Control Rules List14 IP & MAC Binding Setting Binding SettingsTo add IP & MAC Binding entries, follow the steps below To find an existing entry, follow the steps belowDynamic DNS ARP ListTo set up for DDNS, follow these instructions Comexe.cn Ddns88 Dyndns.org Ddns Settings Dyndns.org DdnsSystem Tools 90 The System Tools menuTime Setting 91 Time settingsDiagnostic To set time manuallyTo set time automatically To set Daylight SavingTL-WR740N/TL-WR741ND150Mbps Wireless N Router Firmware Upgrade 94 Diagnostic ResultsFactory Defaults Backup & RestoreReboot 97 Backup & Restore ConfigurationPassword System Log100 System Log Statistics 102 Statistics Statistics Table UDP TxAppendix a FAQ Want to use Netmeeting, what do I need to do? Figure A-3 MAC CloneFigure A-5 Add or Modify a Virtual server Entry Figure A-7 Basic Security Want to build a WEB Server on the LAN, what should I do?Wireless stations cannot connect to the Router Figure A-9 Virtual ServersYour wireless stations Appendix B Configuring the PCs Install TCP/IP componentFigure B-2 Figure B-3 Environmental and Physical WirelessGeneral Appendix D Glossary 106

TL-WR741ND specifications

The TP-Link TL-WR741ND is a versatile wireless router that serves as an ideal networking solution for home and small office environments. Offering a blend of performance, reliability, and affordability, this router has garnered attention for its user-friendly design and solid feature set.

One of the main features of the TL-WR741ND is its compliance with the IEEE 802.11n wireless standard, which allows for wireless speeds of up to 150Mbps. This speed is suitable for a variety of online activities, including web browsing, email, video streaming, and online gaming. The router is also backward compatible with earlier Wi-Fi standards, including IEEE 802.11b/g, ensuring connectivity for a wide range of devices.

With its 2.4GHz frequency band, the TL-WR741ND provides excellent coverage and penetration through walls and obstacles, making it a great option for larger homes or offices. The router incorporates three 5dBi detachable antennas, which significantly enhance the wireless signal strength and coverage area, ensuring that all users can enjoy a stable connection.

Another noteworthy characteristic of the TL-WR741ND is its simple setup process. Users can easily configure the router using the web-based interface, which provides step-by-step instructions for installation. The One-Touch Wireless Security button allows for quick encryption, providing users with the security necessary to protect their data from unauthorized access.

The TP-Link TL-WR741ND also features an integrated NAT firewall and advanced security options such as WEP, WPA/WPA2, and MAC address filtering. These security features work together to create a robust defense against potential threats and unauthorized users, allowing users to browse the internet safely.

Additionally, the router includes four 10/100Mbps LAN ports for wired connections, enabling reliable performance for devices that require a stable internet connection, such as gaming consoles or desktop PCs. The device also supports dynamic IP, static IP, and PPPoE WAN connection types, making it versatile for different internet service providers.

In conclusion, the TP-Link TL-WR741ND offers a compelling mix of performance, features, and user-friendly design. With its strong wireless coverage, simple setup, and solid security options, it remains an excellent choice for anyone looking to enhance their home or small office networking experience.
Top Page Image Contents