Philips FTS6000/12, 848390207 manual Picture Setting, Hdmi Setup

[ Picture Setting ]

Select a predefined set of picture colour settings or customise your personal setting.

•[ Standard ] – original colour setting.

•[ Bright ] – vibrant colour setting.

•[ Soft ] – warm colour setting.

•[ Personal ] – customise the colour setting. Set the level of brightness, contrast, tint and colour saturation in the menu, then press OK.

[ HDMI Setup ]

When you connect this unit and TV with HDMI cable, select the best HDMI setup that your TV can support.

•[ Wide Screen Format ] – define the wide screen format for disc play.

Options	Descriptions
[ Superwide ]	Centre position of the
	screen is stretched less
	than the side. This
	setting is only applicable
	if the video resolution is
	set to 720p or 1080i/p.
[ 4:3 Pillar	No stretching of the
Box ]	picture. Black bars are
	displayed on both sides
	of the screen.
[ Off ]	Picture will be displayed
	according to the format
	of the disc.

Note

•This setting is only available if you have set the [ TV Display ] setting to [ 16:9 Wide Screen ].

•[ HDMI Video ] – select a video resolution that is compatible with your TV display capability.

Options	Descriptions
[ Auto ]	It detects and selects the
	best supported video
	resolution automatically.
[ 480p, 576p,	Select a video resolution
720p, 1080i,	that best supported by
1080p ]	your TV. See your TVs
	manual for details.

Note

•If the setting is not compatible with your TV, a blank screen appears. Wait for 15 seconds for auto recover or switch to its default mode as follows:

1)Press Z. 2) Press b. 3) Press ZOOM.

•[ EasyLink ] – enable all the HDMI CEC compliant TV/device response or react to certain commands simultaneously with one touch control.

Options Descriptions

[ Auto Wake- It wake-ups your TV

up TV ] automatically when you press PLAY to power up this unit and start disc play (if a video disc is found in the disc compartment).

•To disable this feature, select [ Off ].

[ System Respond to standby

Standby ] command from other HDMI CEC compliant TV/devices.

•To disable this feature, select [ Decline ].

40EN