Wireless Settings, Wireless Advanced | TP-Link WA-890EA specification

TL-WA890EAN600 Universal Dual Band WiFi Entertainment Adapter with 4 Ports

4.4.2 Wireless Settings

Selecting Advanced > Wireless Settings will enable you to configure the basic settings for your wireless network on the screen below (Figure 4-9).

Figure 4-9 Wireless Settings

Main Router/AP Wi-Fi Network Name - The name of the wirless network this device is going to connect to.

MAC Address of Main Router/AP - The physical MAC address of the Main Router/AP this device is going to connect to.

Band - The wireless band that the root access point or wireless router is working in.

Wireless Security Type - The wireless security type of the existing wireless network.

Encryption - The encryption of the existing wireless network. It is used when the wireless security type is WPA-PSK or WPA2-PSK.

WEP Index - The WEP index is only used when the wireless security type is WEP (ASCII) or WEP (Hexadecimal).

WEP Auth Type - The authorization type of WEP. It is only used when the wireless security type is WEP (ASCII) or WEP (Hexadecimal).

Wireless Password - The wireless password of the existing wireless network. If the Wireless Security Type is WPA-PSK or WPA2-PSK, the length of this field should be between 8 and 63 characters which are case-sensitive. If the Wireless Security Type is WEP (ASCII), the length should be 5 or 13 characters. If the Wireless Security Type is WEP (Hexadecimal), the length should be 10 or 26 digits.

4.4.3 Wireless Advanced

Selecting Advanced > Wireless Advanced will allow you to do some advanced settings for the device in the following screen shown in Figure 4-10.