TP-Link TL-WA5210G manual Wireless, MAC Clone

Page 29

4.5.3MAC Clone

MAC Clone allows you to clone the MAC address of the managing PC’s adapter to the WAN port. This is because some ISPs require that you register the MAC address of your adapter. Usually, you do not need to change anything here.

Selecting Network > MAC Clone will enable you to configure the MAC address of the WAN port on this page as shown in Figure 4-9.

Figure 4-9 MAC Address Clone

Some ISPs require that you register the MAC Address of your adapter, which is connected to your cable/DSL Modem or Ethernet during installation. Changes are rarely needed here.

¾WAN MAC Address - This field displays the current MAC address of the WAN port, which is used for the WAN port. If your ISP requires that you register the MAC address, please enter the correct MAC address into this field. The format for the MAC Address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit).

¾Your PC's MAC Address - This field displays the MAC address of the PC that is managing the router. If the MAC address is required, you can click the Clone MAC Address To button and this MAC address will fill in the WAN MAC Address field.

Click Restore Factory MAC to restore the MAC address of WAN port to the factory default value.

Click Save to save your settings.

)Note:

1)Only the PC on your LAN can use the Clone MAC Address To feature.

2)If you click Save, the Router will prompt you to reboot.

4.6Wireless

The Wireless option, improving functionality and performance for wireless network, can help you to make the AP an ideal solution for your wireless network.

Here you can create a wireless local area network just through a few settings. Basic Settings is used for the configuration of some basic parameters of the AP. Wireless Mode allows you to select the mode that AP works on. Security Settings provides three different security types to secure your data and thus provide greater security for your wireless network. MAC filtering allows you to control the access of wireless stations to the AP. Wireless Statistics shows you the statistics of current connected Wireless stations. Distance Setting is used to adjust the wireless range in outdoor conditions. Antenna Alignment shows how remote AP's signal strength changes while changing the antenna's direction. Throughput Monitor helps to watch wireless throughput information Wireless statistics enables you to get detailed information about the current connected wireless stations.

There are eight submenus under the Wireless menu (shown in Figure 4-10):Basic Settings,

21

Page 28 Page 30
Image 29
Page 28 Page 30
Contents TL-WA5210G 4GHz High Power Wireless Outdoor CPE Copyright & Trademarks FCC Statement Page Yang Hongliang Product Manager of International Business Product Description 2.4GHz High Power Wireless Outdoor CPEEN623112008 Contents 10.1 III Package Contents Overview of the Product FeaturesProduct Overview Conventions LED Explanation Hardware InstallationInterfaces and button IndicationEnvironment Requirements Connecting the DeviceSystem Requirements Page Configure the Device Quick Installation GuidePlease check the connection following these steps Quick SetupLogin Windows Quick Setup PPPoE IP parameters should have been provided by your ISP Click the Next button. You will then see the Finish Status AP Client Router & AP Router Operation ModeLogin LAN WirelessNetwork Operation ModeWAN Traffic Statistics2 WAN 1 LANPage Page Page Page MAC Clone Wireless10 Wireless menu Basic SettingsWireless Mode 12 Wireless Mode Page Security Settings Page MAC Filtering Page Distance Setting Wireless StatisticsAntenna Alignment Throughput Monitor Dhcp21 The Dhcp menu Dhcp SettingsAddress Reservation Dhcp Clients ListTo delete all Reserved IP addresses Click Clear All Wireless settingsTo modify a Reserved IP address Forwarding 27 The Forwarding menu Virtual ServersPort Triggering Page 3 DMZ UPnP Security34 The Security menu FirewallIP Address Filtering Domain Filtering Page MAC Address Filtering Remote Management Advanced Security Page To add static routing entries Static Routing12 IP & MAC Binding Binding SettingTo find an existing entry, follow the steps below ARP ListTo add IP & MAC Binding entries, follow the steps below Dyndns.org Ddns Dynamic DNSOray.net Ddns Comexe.cn Ddns Snmp Community SettingTo modify a community setting entry Snmp System SettingTime System ToolsFirmware Select Using Daylight Saving Time59 Firmware Upgrade Factory DefaultsPing Watch Dog Backup & RestoreSpeed Test Reboot Syslog PasswordStatistics Table StatisticsIcmp BytesAP Operation Mode Quick Setup Operation Mode Wireless menu Page Wireless Mode Page Page Page Security Settings Page Page MAC Filtering Page Wireless Statistics Distance Setting Dhcp 18 The Dhcp menu Dhcp Clients List 22 Add or Modify an Address Reservation Entry To Reserve IP addressesWireless settings 24 Snmp Settings 26 Snmp System Setting 28 Firmware Upgrade Backup & Restore Speed Test Reboot Password Shown in Figure Figure A-2 PPPoE Connection Mode Appendix a FAQWant to use Netmeeting, what do I need to do? Figure A-3 MAC CloneWant to build a Web Server on the LAN, what should I do? Figure A-6 DMZWireless stations cannot connect to the router Configure TCP/IP component Appendix B Configuring the PC101 Figure B-3 ¾ Setting IP address manuallyNow Figure B-4Physical and Environment Appendix C SpecificationsGeneral Appendix D Glossary

TL-WA5210G specifications

The TP-Link TL-WA5210G is a powerful outdoor wireless access point designed to provide extended coverage and high-speed wireless connectivity in challenging environments. Targeted at outdoor networking applications, this device is commonly utilized for establishing wireless connections across open areas, such as campuses, farms, and remote sites where traditional wired connections may not be feasible.

One of the standout features of the TL-WA5210G is its robust 12dBi directional antenna, which significantly enhances the range and signal strength. By focusing the wireless signal in a specific direction, users can enjoy stable connections over long distances, often exceeding 5 kilometers under optimal conditions. This long-range capability is complemented by support for IEEE 802.11g and IEEE 802.11b standards, providing a flexible and reliable wireless solution.

Equipped with a 5km wireless range, the TL-WA5210G operates on the 2.4GHz frequency band, enabling data transfer rates of up to 54Mbps. Users can also take advantage of a variety of modulation schemes, which optimize the device's performance in diverse environments. In addition, the access point supports WDS (Wireless Distribution System) functionality, allowing for the seamless expansion of wireless networks.

The device boasts an IP65-rated enclosure, making it highly resistant to dust and water, which is essential for outdoor installations. Furthermore, the TL-WA5210G operates in extreme temperatures, ranging from -30°C to 70°C, ensuring reliable performance in varying weather conditions.

For enhanced security, the TL-WA5210G incorporates multiple encryption protocols, including WEP, WPA, and WPA2, safeguarding users against potential threats. The user-friendly web interface facilitates easy installation and management, allowing users to configure settings quickly and efficiently.

In summary, the TP-Link TL-WA5210G is an ideal solution for anyone needing a reliable outdoor wireless access point. Its long-range capability, durable design, and comprehensive security features make it suitable for a wide range of applications, ensuring expansive and secure wireless coverage in outdoor settings. Whether for home, business, or community projects, the TL-WA5210G stands out as a versatile and efficient networking solution.
Top Page Image Contents