Polycom manual RMX 4000 Front Panel LEDs, Following items appear on the RMX 4000 front panel

Page 39

Polycom RMX 4000 Hardware Guide

RMX 4000 LEDs

The RMX includes LEDs located on the front panel and rear panel. In the front panel, the LEDs reflect the state of the components. The LEDs on the rear panel indicate the state of the external connections and the status of the RTM-IP 4000 card.

RMX 4000 Front Panel LEDs

The following items appear on the RMX 4000 front panel:

Table 1-9RMX 4000 Front Panel LED’s

Component	LED ID	LED Color	Description

Fan Status		Green	OK.

		Red	Warning - Fan or power failure.

Power Module/	AC	Green	OK.
Rail Status (AC
Rail Status (AC		Red	Error - Problem with power supply.
only)		Red	Error - Problem with power supply.
only)			When the power cable is
			When the power cable is
			unplugged, the FAIL LED is lit 2-3
			seconds before turning OFF.

	DC	Green	OK.
	(OK)

	DC	Red	Error - Problem with power supply.
	(FAIL)		When the power cable is
			unplugged, the FAIL LED is lit 2-3
			seconds before turning OFF.

		OFF - all	In case of a power failure (main/
		3 LED’s	cable/module) all 3 LED’s are OFF.

1-31

Image 39

Contents Polycom RMX 4000 Hardware Guide Patent Pending Regulatory Notices United States Safety Construction DetailsCE Mark R&RTTE Directive Συμμορφωνεται Προσ ΤΙΣ Ουσιωδεισ Απαιτησεισ ΚΑΙ ΤΙΣ Chinese Communication Certificate Table of Contents Component Replacement Hardware Description IP Protocols Power SupplyPower Consumption PhysicalSystem Capacities Following table summarizes the different system capacitiesSystem Functions Capacity MPM+ Resource Capacities Card Resources Type VoiceHD720p HD1080p @30fps @60fps MPM+ CIF Resource Type Maximum Capacity 4 MPM+ CardsSite Safety Requirements Safety RequirementsRack Mount Safety Precautions General Installation PrecautionsUnpacking the RMX Installing the RMXPolycom RMX 4000 Hardware Guide Installing the RMX in a Rack or as a Standalone Standalone RMX 4000 InstallationRack Mount Preparations Placing the RMX 4000 in a 19 Rack 2Installing chassis runners and RMX in a rack3RMX 4000 Rack Mount 4Removing and attaching 19 and 23 brackets Placing the RMX 4000 in a 23 RackTo reverse mount the RMX 4000 on a 19 rack Reverse Mounting the RMX 4000 in a RackConnecting the RMX 4000 to Power Sources Make sure that the power button is switched OFF on the RMX Connecting the RMX 4000 to AC PowerConnecting the RMX 4000 to -48DC Selv Power Hardware Description To connect the cables AC and DC systems RTM-IP Connecting Cables on the RMXFirst-time Power-up For more information about specific card connections, seeRTM LAN on RMX 4000 Front Panel RMX 4000 Components8shows the front panel of an RMX 4000 DC system Component Description 9RMX 4000 AC Rear View RMX 4000 Rear Panel10RMX 4000 DC Rear View RTM-IPLAN 3 Cntl Following items appear on the RMX 4000 rear panelStandby button Toggle between CPU activation and standby RTM Isdn ISDN/PSTN Clock Source AC Power Entry Module PEMDC Power Rail Module Component Slot AllocationSlot ID/No Card/Component Requirement RTM ISDN/RTM LED Color Description RMX 4000 Front Panel LEDsFollowing items appear on the RMX 4000 front panel ComponentCard Insertion Initiated If during Card removal Initiated The cardCntl 4000 Unit LED Color Description Name RMX 4000 Rear Panel LEDsRTM-IP Following LEDs appear on the RTM-IP 4000 cardFunction Name Following LEDs appear on the RTM LANFollowing LEDs appear on the RTM Isdn RTM IsdnComponent Replacement Component Replacement Handle Using the Modified PMC Compatible Ejector LeverReplacing the Cntl 4000 Module Replacing an AC Power Supply Module Replacing an AC Power Entry Module PEM Replacing a DC Power Rail Module PRM Component Replacement Carefully slide the Fan drawer out through the front panel Replacing the Fan DrawerInserting an Air Filter Optional in the Fan Drawer Removing the MPM+ Card from the MCU Replacing a Faulty MPM+ CardComponent Replacement Carefully slide the MPM+ card out through the front panel Installing the Replacement MPM+ CardReplacing a RTM Isdn Card Installing a New MPM+ Card in a Powered On RMXPRI Cables Replacing the RTM-IP Replacing the RTM LAN Replacing the Fabric Switch Module FSM

Related manuals

Manual 2 pages 709 b