Polycom DOC2558B manual Installing a New MPM/MPM+/MPMx Card in a Powered On RMX

Page 42

Chapter 1- Hardware Description

5Carefully slide the MPM/MPM+/MPMx card out through the front panel.

Installing the Replacement MPM/MPM+/MPMx Card

1On the card to be installed, move the ejector levers to their fully open position.

2Slide in the replacement MPM/MPM+/MPMx card.

3Push the MPM/MPM+/MPMx card firmly into the Backplane, making sure it is properly seated in its slot.

4Ensure that the metal ejector levers are fully retracted into their housings.

5Tighten the captive screws on the front panel of the RMX that secure the MPM/MPM+/MPMx card to the chassis.

Installing a New MPM/MPM+/MPMx Card in a Powered On RMX 2000

1If applicable, loosen the captive screws and remove the slot cover.

2On the card to be installed, move the ejector levers to their full open position.

3Insert the card into the slot until the ejector levers touch the front edge of the card cage.

4Push the ejector levers to their closed position and tighten the captive screws on each side of the card, securing the MPM/MPM+/MPMx card to the RMX.

1-36

Image 42

Contents Polycom RMX System Hardware Guide USA Regulatory Notices United States Federal Communication Commission FCCChinese Communication Certificate Singapore Certificate Table of Contents Table of Contents Main Features Hardware DescriptionRMX 2000 Specifications RMX 2000 System Capacities Conferencing CapacitiesSystem Functions MPM Mode MPM+ Mode MPMx Mode Resource Capacities MPM+Safety Requirements Rack Mount Safety PrecautionsSite Requirements Installation Precautions RMX 2000 Components RMX 2000 Front PanelComponent Description Cntl CPUComponent Description RMX 2000 Rear Panel RTM IPFollowing items appear on the RMX 2000 rear panel RTM Isdn ISDN/PSTN Clock Source All external connectors are located on the rear panel Cables Connected to the RTM IP & Isdn CardsComponent RMX 2000 LEDsRMX 2000 Front Panel LEDs LED Color DescriptionCard removal Initiated The card Card Insertion Initiated If duringCntl Unit RMX 2000 Rear Panel LEDs LED Color Description NameShMG LEDs RTM Isdn Function NameMPM/MPM+ and MPMx Configuration Modes Resource Type Maximum Possible Resources Per CardMPMx Up to Card Resources Bandwidth TypeHD720p HD1080p @30fps @60fps MPM+ 4MbpsMPMx Resource Capacities per Card Assembly Resource Type MPMx S MPMx DAll MPMx MPMx OnlyMPM+ MPMx Only MPM Only MPM MPM+ OnlyMPM+ MPM+ Only MPMx MPMCard Configuration Mode remains MPMx RMX Chassis Types RMX 2000 General Information dialog box opensComponent Replacement Using the All Metal Ejector Lever Types of Ejector Levers on RMX ComponentsReplacing the Cntl Module Hardware Description Replacing the Power Supply Module Replacing the Fan Drawer Replacing a Faulty MPM/MPM+/MPMx Card Removing the MPM/MPM+/MPMx Card from the MCUInstalling a New MPM/MPM+/MPMx Card in a Powered On RMX Installing the Replacement MPM/MPM+/MPMx CardReplacing a RTM Isdn Card PRI Cables Replacing the RTM IP Card