Polycom manual Initial RSS 2000 IP Configuration, IP Address192.168.1.254, Gateway

Page 3

Initial RSS 2000 IP Configuration

The system is shipped with a default IP address:

IP Address:192.168.1.254

Subnet Mask: 255.255.255.0

Gateway: 192.168.1.1

There are two ways to change the initial IP address of the sytem:

1.Via a cross over lan cable

2.Via a RS232 or Telnet Console.

1.Changing the initial IP address via a cross over lan cable

1.Connect a cross over lan cable to LAN1 in the RSS 2000.

2.Set your laptop to the same segment of the RSS

a. For example (in your laptop IP config setting):

DOC2207A RSS 2000 V3.0 Getting Started guide - Release Note - Final - February 26, 2008.doc

Image 3
Contents Hardware Specification General Safety PrecautionsPreparations Unpacking and Installing the RSSInitial RSS 2000 IP Configuration IP Address192.168.1.254Gateway Page Changing the IP Address HelpScenario Description Maximum Capacity RSS 2000 Maximum CapacityUsage Type Port Range Network TCP/UDP ports used by RSS2000Page Page Package Name Description RSS2000 V3.0 Upgrade User GuideProcess Keycode definitionPage Page Part2 Preparation before Upgrade Pgrade package definitionHow to receive Key code Part1Upgrade from 1.0 to Download upgrade package to RSS Activate your RSS by KeycodeCheck the status Language support Upgrade from 2.0 to Download upgrade package to RSS Language support Image version check Additional Language SupportUpgrade additional language package Features Description New Features Compare withHard reset power off and on is not recommended RSS2000 Policies and LimitationsSubject Description Subject Description Subject Known LimitationsPending issues
Related manuals
Manual 82 pages 51.89 Kb Manual 36 pages 13.32 Kb