Polycom MX392 manual Table of Contents

Page 2
Table of Contents

Table of Contents

 

TABLE OF CONTENTS

2

SHURE MX392 BASICS

3

Logic Port

6

Physical Connections and Grounding

7

TOGGLE OPERATION (PUSH TO TALK)

8

Default Conditions

8

Logic Input

8

Logic Output

10

TOGGLE OPERATION (PUSH TO MUTE)

13

Default Conditions

13

Logic Input

13

Logic Output

15

TOGGLE OPERATION MUTE ALL EXAMPLE

17

Default Conditions

17

Macros

18

Logic Input

21

Logic Output

23

MOMENTARY OPERATION (PUSH TO TALK)

25

Default Conditions

25

Logic Input

26

Logic Output

28

MOMENTARY OPERATION (PUSH TO MUTE)

30

Default Conditions

30

Logic Input

31

Logic Output

33

MOMENTARY OPERATION MUTE ALL EXAMPLE

35

Default Conditions

35

Macros

35

Logic Output

42

TECHNICAL SUPPORT

44

2

Image 2
Contents Using the Shure MX392 Push to Talk Microphone with Vortex Devices Application Note Polycom Installed Voice Business GroupTable of Contents SHURE MX392 BASICS Switch Behavior Page LOGIC PORT PHYSICAL CONNECTIONS AND GROUNDING LOGIC INPUT DEFAULT CONDITIONSTOGGLE OPERATION PUSH TO TALK Do not assign any command to the HELD COMMAND column If you are successful, you should see this on the screenLOGIC OUTPUT Here is what the screen should look like when you are finished Page TOGGLE OPERATION PUSH TO MUTE Do not assign any command to the HELD COMMAND column If you are successful, you should see this on the screenLOGIC OUTPUT Here is what the screen should look like when you are finished TOGGLE OPERATION MUTE ALL EXAMPLE MACROS Likewise, here is the Macros page for the Vortex EF2241BROADAF00MUTEI11 BROADAB01MUTEI11Page LOGIC INPUT Do not assign any command to the HELD COMMAND column LOGIC OUTPUT Page MOMENTARY OPERATION PUSH TO TALK LOGIC INPUT Page LOGIC OUTPUT Here is what the screen should look like when you are finished MOMENTARY OPERATION PUSH TO MUTE LOGIC INPUT If you are successful, you should see this on the screen LOGIC OUTPUT Here is what the screen should look like when you are finished MOMENTARY OPERATION MUTE ALL EXAMPLE Likewise, here is the Macros page for the Vortex EF2241 microphones on all units regardless of whether a microphone is muted from the Vortex EF2280 or the Vortex EF2241. To accomplish this, we will use the BROADA command to send MUTEI commands from one unit to the other unit. The BROADA command broadcasts any command that is after the colon. For example, if a Macro in the Vortex EF2241 has this command Page LOGIC INPUT Page Page LOGIC OUTPUT Make sure the LED works as designed. If you press the membrane switch, you should see the LED above the pins illuminate in Conference Composer as well as on every MX392. Since the switch is a membrane switch, the LED will stay lit until the switch is pushed and held down TECHNICAL SUPPORT Polycom Installed Voice Business Group Contact Information