TP-Link AV500, AV200 manual Status

Page 21

TL-WPA4220/TL-WPA281300Mbps AV500/AV200 WiFi Powerline Extender

3.2 Status

The Status page displays the powerline extender’s current status and configuration. All information is read-only.

Figure 3-6 Status

¾Firmware Version - This field displays the current firmware version of the powerline extender.

¾Hardware Version - This field displays the current hardware version of the powerline extender.

¾Powerline - This field displays the current settings or information for powerline, including the MAC address, Device Password and Network Name which can be configured on the Powerline Network Settings page.

z MAC Address - The physical address of the powerline extender, as seen from powerline. z Device Password - The security ID that restricts access to critical device functions.

z Network Name - The name that identifies a logical network.

¾Network - The following parameters apply to the Ethernet port of the powerline extender. You can configure them on the Network page.

z MAC Address - The physical address of the powerline extender's Ethernet port. z IP Address - The IP address of the powerline extender.

z Subnet Mask - The subnet mask associated with IP address.

13

Image 21
Contents REV1.0.0 1910010849 Copyright & Trademarks CE Mark Warning FCC StatementSafety Information Yang Hongliang Product Manager of International Business Declaration of ConformityImportant Safety Instructions Contents Appendix a Troubleshooting Guide Connecting to Wireless NetworkPackage Contents IntroductionSystem Requirement Conventions LED Indicator Hardware ConnectionBefore You Begin LED LEDs Name Status IndicationPhysical Interface Connecting to the InternetHardware Connection DescriptionConnecting the Computer Page Wi-Fi Clone Button for Super Range Extension Wi-Fi Clone StepsAfter Wi-Fi Clone Page Configure the Device LoginFor Wired Connection Management Utility Login Windows For Wireless ConnectionStatus StatusNetwork WirelessWireless Settings Wireless menuWireless Security 10 Wireless Security ¾ WPA/WPA2 Select WPA/WPA2 based on Radius Server Wireless MAC Filtering To modify or delete an existing entry To set up an entry, follow these instructionsWireless Advanced Wireless Statistics Powerline Network SettingsStation Settings Page System Tools Firmware UpgradeTo upgrade the devices firmware, follow these instructions Backup & Restore Factory DefaultsPassword RebootSystem Log Windows Connecting to Wireless NetworkInput the network key and then click OK Windows Vista Input the network key and then click OK Windows XP Input the network security key and then click Next Page Setting Up a Powerline Network with the Pair Button Pair Button and Reset ButtonCreate a Powerline network using the Pair button: Join an existing Powerline NetworkLeave an existing Powerline Network ResetPower LED does not light up Appendix a Troubleshooting GuidePowerline LED does not light up Ethernet LED does not light upAppendix B Specifications
Related manuals
Manual 2 pages 14.32 Kb