Note:
Please refer to your printer user manual on how to setup your printer on the computer.
2.1.3 Connecting to an USB HUB
a)If you have more than one USB device that you would like to share over your network, you may add an USB
b)Connect the USB cable of the USB HUB to the USB port on the MFP and Storage Server, and then connect the USB device(s) to the USB ports on the USB HUB. Make sure the power adapter of the USB HUB is plugged in and powered on.
Note:
MFP and Storage Server can only support up to 4 USB devices through an USB HUB and certain USB devices require a direct connection to your computer in order to function at full capacity.
c)After the USB device(s) are connected to the USB HUB, the MFP and Storage Server setup utility will automatically display the connected USB device(s). If you do not see the USB device(s) that are connected, press “Search” button to refresh the list.
10