TP-Link TL-SG1008P manual Installation, Mounting the Switch on a Desk, Power On

Chapter 2. Installation

During the installation procedure, please only use the accessories equipped with the Switch.

2.1 Mounting the Switch on a Desk

To install the Switch, please follow the steps:

1)Place the Switch on a flat desk.

2)Remove the adhesive backing papers from the rubber cushions.

3)Turn over the Switch and attach the supplied four rubber cushions to the recessed areas on the bottom at each corner of the Switch.

Note

1)Please avoid any heavy thing placed on the Switch.

2)Make sure the power is off before unplugging the power adapter.

2.2 Power On

The TL-SG1008P Switch can be used with DC power supply. Powering on the Switch, it will automatically initialize and its LED indicators will respond as follows:

1) Firstly, the Power LED indicator will light up.

4