PoE Ports (1-4):These ports support PoE function which integrates power and data onto one Ethernet cable. Once the device you connect to the Switch is identified, the Switch will supply power through the PoE port, and then you can use it as a 10/100/1000Mbps Auto-Negotiation RJ45 Ethernet port. The working status can be indicated by the corresponding LEDs on the front panel.
Ethernet Ports (1-8):Besides the 4 PoE ports, the TL-SG1008P Switch is also equipped with the other four 10/100/1000Mbps Auto-Negotiation RJ45 ports without PoE function. Once the network devices are connected to these 8 ports through the network cable, the Switch will make them plug and play according to the Auto-MDI/MDIX detection. The working status can be indicated by the corresponding LEDs on the front panel.
Note
Make sure the PDs you connected to the Switch are compliant with IEEE802.3af.
8
