TP-Link TD-W8980 manual PPPoA

Page 37

TD-W8980

N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide

¾IPv6 Default Gateway: Select a WAN connection from the drop-down list as the IPv6 default gateway.

Click Advance, advanced selections for WAN Service Setup can be shown.

¾Service Name/Server Name: Enter the Service Name and Server Name if it was provided by your ISP. You can leave them blank, if the ISP doesn’t provide them.

¾MTU (bytes): Maximum Transmission Unit Size. Check this box then you can change the MTU size. The default MTU value is 1500 Bytes. It is not recommended that you change the default value unless required by your ISP.

¾Enable Fullcone NAT: It is a type of NAT, if not enabled, the default NAT will act.

¾Enable SPI Firewall: A SPI firewall enhances network’s security. Select the option to use a firewall, or else without a firewall.

¾Enable IGMP Proxy: IGMP (Internet Group Management Protocol) is used to manage multicasting on TCP/IP networks. Some ISPs use IGMP to perform remote configuration for client devices, such as the modem router. The default value is disabled, and if you are not sure, please contact your ISP or just leave it.

¾Use IP address specified by ISP: Choose “Use IP address specified by ISP”, you can enter the IP address provided by your ISP.

¾Set DNS Server manually: Choose “Set DNS Server manually”, you can set DNS Server manually here. The modem router will use this DNS Server for priority.

¾Use IPv6 address specified by ISP: Choose “Use IPv6 address specified by ISP”, you can enter the IPv6 address provided by your ISP.

¾Set IPv6 DNS Server manually: Choose “Set IPv6 DNS Server manually”, you can set IPv6 DNS Server manually here. The modem router will use this IPv6 DNS Server for priority.

Click the Save button to save the settings.

4.5.1.4 PPPoA

If your ISP provides a PPPoA connection and you need to use an ATM Interface, choose PPPoA in the drop-down list, and then the screen will be displayed as below.

The configuration is similar to PPPoE. Please refer to the section 4.5.1.3 PPPoE to configure this part.

28

Page 36 Page 38
Image 37
Page 36 Page 38
Contents TD-W8980 Copyright & Trademarks FCC Statement Country Restriction Reason/remark National RestrictionsKorea Warning Statements Declaration of Conformity Contents USB Settings IPv6 Firewall Package Contents Overview of the Modem Router Product OverviewMain Features Front Panel Panel LayoutLED Explanation Name Status Indication WPS Back Panel System Requirements Installation Environment RequirementsConnecting the Modem Router TD-W8980 Configuring the PC Quick Installation GuideTD-W8980 TD-W8980 Is the TCP/IP configuration for your PC correct? Quick Installation GuideTD-W8980 TD-W8980 TD-W8980 TD-W8980 TD-W8980 Status LoginOperation Mode Quick SetupNetwork WAN Settings Static IP Dynamic IP TD-W8980 PPPoE TD-W8980 PPPoA IPoA Bridge Interface Grouping LAN Settings 4 IPv6 LAN Settings MAC Clone ALG Settings IPSec VPN DSL SettingsTD-W8980 TD-W8980 Dhcp Server Dhcp Settings Clients List To Reserve an IP address Address ReservationTo modify or delete an existing entry To add a vendor class Conditional PoolBasic Settings Wireless 2.4GHzDual Band Selection TD-W8980 WPS Settings Use the Wi-Fi Protected Setup Button III. Enter the modem router’s PIN on your client device II. Enter the client device’s PIN on the modem routerWireless Security TD-W8980 Wireless MAC Filtering To edit or delete an existing entry Wireless AdvancedPage Wireless Status Wireless 5GHzTD-W8980 WPS Settings II. Enter the client device’s PIN on the modem router Wireless Security TD-W8980 Wireless MAC Filtering To edit or delete an existing entry Wireless Advanced USB Settings User Accounts USB Mass StorageTo add a new user account, please follow the steps below Storage SharingTo add a new folder, follow the instructions below FTP Server TD-W8980 Media Server Print Server Default Gateway Route SettingsStatic Route To add static routing entries11.3 IPv6 Static Route To add a new entry, follow the instructions below RIP SettingsVirtual Servers ForwardingTo set up a virtual server entry To add a new rule, follow the steps below Port Triggering12.3 DMZ To assign a computer or server to be a DMZ server UPnPParental Control Rule 14 IPv4 FirewallMethods to add a new rule LAN HostTo add a new entry, please follow the steps below WAN HostTD-W8980 To add a new schedule, follow the steps below Schedule15.1 IPv6 Rule 15 IPv6 FirewallTo add a new IPv6 rule 15.2 IPv6 LAN Host 15.3 IPv6 WAN Host 15.4 IPv6 Schedule 16 IPv6 Tunnel 6RD DS-Lite6to4 Bandwidth Control¾ Priority 18 IP&MAC Binding Binding SettingsARP List Dynamic DNSTo add IP & MAC Binding entries, follow the steps below Diagnostic System Log System ToolsTime Settings Manage Control Cwmp SettingsTo set time automatically Snmp Settings Factory Defaults Backup & RestoreFirmware Upgrade Statistics Reboot103 Physical and Environment GeneralCon-figure IPv4 box under TCP/IP, select Using Dhcp T2. What can I do if I don’t know or forget my password?For Mac OS Go to System Preferences -NetworkClick Internet Options Select Never dial a connection Click View network status and tasks Change adapter settingsT4. What can I do if I cannot access the Internet? Appendix C Technical Support
Related manuals
Manual 120 pages 13.27 Kb

TD-W8980 specifications

The TP-Link TD-W8980 is a versatile and powerful ADSL2+ modem router designed to cater to the modern user's broadband needs. Packed with features and cutting-edge technologies, the TD-W8980 makes an excellent choice for both home and small office environments.

One of its primary attributes is its all-in-one design, combining a high-speed ADSL2+ modem with a wireless N router. This integrated device simplifies the setup process, as users only need one unit to manage both their internet connection and wireless network. The TD-W8980 supports ADSL standards, offering high download speeds of up to 24 Mbps, which is ideal for activities like streaming, gaming, and downloading large files.

The router supports dual-band wireless connectivity, providing both 2.4 GHz and 5 GHz bands. This allows users to enjoy flexible connectivity options; the 2.4 GHz band is perfect for basic tasks like browsing and emailing, while the 5 GHz band is designated for bandwidth-intensive tasks that require higher speeds, such as HD video streaming and online gaming.

Equipped with four Ethernet LAN ports, the TD-W8980 facilitates wired connections for devices requiring stable and fast internet access, such as desktops, gaming consoles, and smart TVs. The multiple LAN ports mean users can simultaneously connect several devices without compromising performance.

Security is also a crucial consideration, and TP-Link has included robust protocols in the TD-W8980 to protect users’ networks. It supports WPA/WPA2 encryption methods to safeguard wireless communications, along with a built-in firewall to fend off online threats. Additionally, the router offers Parental Controls and an access control feature, allowing users to manage their network effectively.

The TD-W8980 features an intuitive web interface that simplifies configuration and management. Users can easily set up their home network, configure security settings, and monitor connected devices with just a few clicks. The device also supports Quality of Service (QoS) settings, enabling users to prioritize bandwidth for specific applications or devices, ensuring a smooth online experience.

With its comprehensive set of features, solid performance, and user-friendly interface, the TP-Link TD-W8980 stands out as a reliable choice for anyone looking to establish a robust and efficient internet connection at home or in a small office. Its combination of advanced technologies and practical characteristics has made it a popular option in the competitive networking market.
Top Page Image Contents