TP-Link TD-W8901G manual 54M Wireless ADSL2+ Modem Router User Guide

Page 50

TD-W8901G

54M Wireless ADSL2+ Modem Router User Guide

Figure 4-34

¾Filter Type Selection: Select the filter type for the configuration below.

¾IP/MAC Filter Set Index: Select the Set index for the IP Filter entry. This index can match with six IP / MAC Filter Rule Indexes.

¾Interface: Select the interface for the entry.

)Note:

If select PVC0~PVC7 as an interface, the filter will match the IP traffic of WAN port with specified IPs (Source IP Address and Destination IP Address). If select LAN as an interface, the filter will match the IP traffic of LAN port with specified IPs.

¾Direction: Select the direction for this IP Filter rule. There are three filtering directions: Both, Incoming, Outgoing.

43

Image 50
Contents TD-W8901G 54M Wireless ADSL2+ Modem Router Copyright & Trademarks FCC Statement National Restrictions 2400.0-2483.5 MHz Country Restriction Reason/remarkProduct Description 54M Wireless ADSL2+ Modem Router Zhao Jianjun Director of International BusinessContents Appendix a Specification Package Contents Product Overview Main FeaturesWireless TD-W8901GTD-W8901G54M Wireless ADSL2+ Modem Router User Guide ConventionsFront Panel LED Explanation Name Status IndicationInstallation Environment Back PanelConnecting the Router TD-W8901G54M Wireless ADSL2+ Modem Router User Guide Quick Installation Guide Configure PCTD-W8901G54M Wireless ADSL2+ Modem Router User Guide Configure the IP address as -4shows. After that, click OK Is the connection between your PC and the Router correct? LoginIs the TCP/IP configuration for your PC correct? TD-W8901G54M Wireless ADSL2+ Modem Router User Guide Connection Type. Then click Next 54M Wireless ADSL2+ Modem Router User Guide Status Device InfoSystem Log Statistics Statistics Table Receive Receive total BytesInterface Setup Quick StartInternet Dynamic IP Address Static IP Address PPPoA/PPPoETD-W8901G54M Wireless ADSL2+ Modem Router User Guide Bridge Mode 2 LAN54M Wireless ADSL2+ Modem Router User Guide How to assign a static IP address to the client? Wireless 54M Wireless ADSL2+ Modem Router User Guide WEP-64Bits WEP-128Bits WPA-PSKWPA2-PSK Routing Advanced SetupFirewall 3 NAT 3.1 DMZ Virtual ServerTo add a virtual server entry Other operations for the entries as shown in FigureTo add a mapping rule 4 QoS Vlan Assign Vlan Pvid for each Interface Adsl Define Vlan GroupAccess Management 1 ACLFilter IP Filter54M Wireless ADSL2+ Modem Router User Guide To add an IP Address filtering entry TD-W8901G54M Wireless ADSL2+ Modem Router User Guide MAC Filter To add a MAC Address filtering entry54M Wireless ADSL2+ Modem Router User Guide 54M Wireless ADSL2+ Modem Router User Guide To add a URL filter entry Snmp UPnPDdns CwmpMaintenance AdministrationTime Zone NTP Server automaticallyManually FirmwarePC’s Clock To back up the Router’s current settings To restore the Router’s settings System RestartDiagnostic Help54M Wireless ADSL2+ Modem Router User Guide Appendix a Specification
Related manuals
Manual 15 pages 33.95 Kb