Package Contents
The product model shown in this QIG is
CD Setup Wizard ( For Windows users only )
1 | Insert the | 3 | Then a ash video will pop up and show you how to connect |
| your devices. When you nish the hardware connection, click | ||
|
|
| to continue. |
Quick Installation Guide
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router
Please select your preferred setup wizard.
CD Setup Wizard
For Windows users only
For Mac OS/Linux/Windows users who are
Ethernet Cable
N600 Wireless Dual Band Giabit ADSL2+ Modem Router
Please select your preferred setup wizard.
CD Setup Wizard
For Windows users only
For Mac OS/Linux/Windows users who are unable to run the Resource CD
QIG
Power Adapter | Resource CD | |
|
|
|
ADSL Splitter | Phone Cable x 2 |
2 | Click StartSetup. | 4 | The Easy Setup Assistant will start. Please check to see if the |
| LEDs (especially the ADSL LED) of your modem router display |
normally as the chart describes. Then click NEXT, and follow the
unable to run the Resource CD
MODEL NO.
Necessary Information
For a smoother setup, we suggest that you consult yourISP rst and ask for the following information . This information will be used during the conguration stage.
VPI/VCI:Connection Type: Encapsulation Type (Optional):
For the advanced congurations, please refer to the User Guide on the Resource CD provided. You can also log on to
1Hardware connection.
Phone Cable
Wall Socket
LINE
Splitter
PHONE MODEM
1 |
| Computer |
3 | 2 | |
Phone Cable | Ethernet Cable | |
|
|
Step 1: Connect your devices step by step following the gure.
Step 2: Power on all your devices and then check the LEDs (especially the ADSL LED).
Name | Status | Indication | |
(Power) | On | The modem router is powerd on. | |
| On | ADSL line is synchronized and ready | |
(ADSL) | to use. | ||
| |||
|
| ||
| Flashing | ADSL negotiation is in progress. | |
(WLAN) | Flashing | Wireless is enabled. | |
| On | There is a device conneted to this LAN | |
| port. | ||
(LAN |
| ||
| The modem router is sending or receiving | ||
| Flashing | ||
|
| data over this LAN port. |
2
3
Open your browser and type http://192.168.1.1 in the address eld. Then use the default user name admin and password admin to log in.
If you are unable to access 192.168.1.1, please
refer to T3 in Troubleshooting.
Click Quick Setup in the main menu and then click Next.
7106504377 REV1.1.0