TP-Link Rev 1.0.0 1910010810 manual Quick Installation Guide, Enter key

Page 19

TL-WR841HP300Mbps High Power Router User Guide

3.Is the default LAN IP of the Router correct?

Note:

If the LAN IP of the modem connected with your router is 192.168.0.x, the default LAN IP of the Router will automatically switch from 192.168.0.1 to 192.168.1.1 to avoid IP conflict. Therefore, in order to verify the network connection between your PC and the Router, you can open a command prompt, and type ping 192.168.1.1, and then press Enter.

3.2 Quick Installation Guide

With a Web-based utility, it is easy to configure and manage the 300Mbps High Power Router. The Web-based utility can be used on any Windows, Macintosh or UNIX OS with a Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari.

1.To access the configuration utility, open a web-browser and type in the default domain name http://tplinklogin.net in the address field of the browser.

Figure 3-3Log in the Router

After a moment, a login window will appear, similar to the Figure 3-4.Enter admin for the User Name and Password, both in lower case letters. Then click the OK button or press the

Enter key.

Figure 3-4 Login Windows

Note:

If the above screen does not pop-up, it means that your Web-browser has been set to a proxy. Go to Tools menu>Internet Options>Connections>LAN Settings, in the screen that appears, cancel the Using Proxy checkbox, and click OK to finish it.

- 10 -

Page 18 Page 20
Image 19
Page 18 Page 20
Contents 300Mbps High Power Router Copyright & Trademarks FCC Statement Korea Warning Statements NCC Notice & Bsmi Notice Yang Hongliang Product Manager of International Business Product Description 300Mbps High Power RouterContents 11.1 100 Package Contents Incredible Speed Flexible Access ControlSimple Installation Overview of the RouterConventions Main FeaturesFront Panel Panel LayoutName Status Indication Rear Panel  Used as Reset button Used as WPS button Connecting the Router Installation Environment RequirementsSystem Requirements Hardware Installation of the 300Mbps High Power Router TCP/IP Configuration Quick Installation GuidePlease check the connection following these steps Success result of Ping commandEnter key Quick Installation GuideTL-WR841HP Quick Setup PPPoE 10 Quick Setup Static IP 11 Quick Setup Wireless  PSK Password You can enter Ascii or Hexadecimal characters Status LoginWPS Quick SetupUse the Wi-Fi Protected Setup Button III. Enter the Router’s PIN on your client device II. Enter the client device’s PIN on the Router1 WAN NetworkTL-WR841HP300Mbps High Power Router User Guide TL-WR841HP300Mbps High Power Router User Guide WAN PPPoE PPPoE Advanced Settings TL-WR841HP300Mbps High Power Router User Guide NSW / ACT nsw.bigpond.net.au TL-WR841HP300Mbps High Power Router User Guide 12 Pptp Settings  Note MAC Clone 2 LANWireless Settings Wireless16 Wireless Settings TL-WR841HP300Mbps High Power Router User Guide Wireless Security 18 Wireless Security TL-WR841HP300Mbps High Power Router User Guide Encryption You can select either Automatic, or Tkip or AES Wireless MAC FilteringTo modify or delete an existing entry 22 Wireless MAC FilteringModify the information Click the Save button Wireless Advanced24 Wireless Advanced Dhcp Wireless Statistics27 Dhcp Settings Dhcp SettingsAddress Reservation Dhcp Client ListVirtual Servers ForwardingTo Reserve an IP address To set up a virtual server entry 33 Add or Modify a Virtual Server Entry Port TriggeringTo add a new rule, follow the steps below 35 Add or Modify a Port Triggering Entry 3 DMZTo assign a computer or server to be a DMZ server UPnPBasic Security SecurityAdvanced Security  Note 41 Local Management Local Management Note Remote ManagementTo add a new entry, please follow the steps below Parental Control44 Add or Modify Parental Control Entry Rule 11Access ControlThere are two methods to add a new rule Method One 47 Access Control Rule Management48 Quick Setup Create a Host Entry TL-WR841HP300Mbps High Power Router User Guide Method Two 52 Add Internet Access Control Entry Host 53 Host Settings54 Add or Modify a Host Entry Target56 Target Settings 57 Add or Modify an Access Target Entry For example If you 00-11-22-33-44-AA in settings belowTo add a new schedule, follow the steps below Schedule12Advanced Routing 60 Advanced Schedule SettingsTo add static routing entries, follow the steps below Static RoutingSystem Routing Table Bandwidth ControlRules List Control SettingsBinding Settings 14 IP & MAC Binding SettingTo add IP & MAC Binding entries, follow the steps below 69 Binding SettingsTo find an existing entry, follow the steps below ARP ListComexe.cn Ddns Dynamic DNSDyndns.org Ddns To set up for DDNS, follow these instructions74 Dyndns.org Ddns Settings System Tools Time SettingsTo set time manually 77 Time settingsTo set time automatically DiagnosticTo set Daylight Saving TL-WR841HP300Mbps High Power Router User Guide 79 Diagnostic Results Firmware UpgradeBackup & Restore Factory Defaults82 Backup & Restore Configuration RebootSystem Log Password85 System Log Statistics Icmp Tx Statistics TableTCP Appendix a FAQ Want to use NetMeeting, what do I need to do? Figure A-3 MAC CloneFigure A-5 Add or Modify a Virtual server Entry Want to build a WEB Server on the LAN, what should I do? Figure A-7 Basic SecurityFigure A-9 Virtual Servers Wireless stations cannot connect to the RouterConfigure TCP/IP component Appendix B Configuring the PCShown in the Figure below Figure B-3  Setting IP address manuallyNow click OK to keep your settings General WirelessEnvironmental and Physical Appendix D Glossary 101

Rev 1.0.0 1910010810 specifications

The TP-Link Rev 1.0.0 1910010810 is a powerful and versatile networking device aimed at enhancing connectivity in both home and office environments. Designed by TP-Link, a brand well-known for its innovative networking solutions, this model boasts several features and technologies that make it a strong choice for users seeking reliable internet access.

One of the standout characteristics of the TP-Link Rev 1.0.0 is its dual-band Wi-Fi capabilities. Operating on both the 2.4GHz and 5GHz frequency bands, this device enables users to experience faster speeds and reduced interference. The dual-band functionality is particularly useful in households with multiple devices, allowing users to connect their laptops, smartphones, tablets, and smart home devices without compromising speed or performance.

In terms of speed, the TP-Link Rev 1.0.0 supports Wi-Fi 5 technology, which can deliver speeds of up to 1.75 Gbps. This robust performance is ideal for bandwidth-intensive activities such as online gaming, streaming high-definition videos, and video conferencing. The MU-MIMO technology further enhances this performance by allowing multiple devices to communicate with the router simultaneously, reducing wait times and improving overall efficiency.

Security is another critical aspect of the TP-Link Rev 1.0.0. The device features advanced security protocols, including WPA3, which provides a higher level of protection against unauthorized access and potential threats. This means users can enjoy a more secure browsing experience without the constant worry of security breaches.

Setting up the TP-Link Rev 1.0.0 is straightforward, thanks to its intuitive web interface and mobile app. The TP-Link Tether app allows users to manage their network easily, providing options to customize settings, monitor device connections, and perform firmware updates. This user-friendly approach empowers even those with limited technical knowledge to optimize their network performance.

Additionally, the device is equipped with advanced QoS (Quality of Service) settings, which enable users to prioritize bandwidth for specific applications or devices. This feature ensures that critical activities, such as gaming or streaming, receive the necessary resources for optimal performance, enhancing the overall user experience.

In summary, the TP-Link Rev 1.0.0 1910010810 is a feature-rich networking device that caters to the needs of modern users. With its dual-band support, high-speed capabilities, robust security features, and user-friendly management options, it stands out as an excellent choice for anyone seeking to improve their internet connectivity and experience.
Top Page Image Contents