TP-Link Rev 1.0.0 1910010810 manual To add a new rule, follow the steps below

Page 56

TL-WR841HP300Mbps High Power Router User Guide

Figure 4-34Port Triggering

Once the Router is configured, the operation is as follows:

1.A local host makes an outgoing connection using a destination port number defined in the Trigger Port field.

2.The Router records this connection, opens the incoming port or ports associated with this entry in the Port Triggering table, and associates them with the local host.

3.When necessary， the external host will be able to connect to the local host using one of the ports defined in the Incoming Ports field.

Trigger Port - The port for outgoing traffic. An outgoing connection using this port will trigger this rule.

Trigger Protocol - The protocol used for Trigger Ports, either TCP, UDP, or All (all protocols supported by the Router).

Incoming Ports - The port or port range used by the remote system when it responds to the outgoing request. A response using one of these ports will be forwarded to the PC that triggered this rule. You can input at most 5 groups of ports (or port sections). Every group of ports must be set apart with ",". For example, 2000-2038, 2050-2051, 2085, 3010-3030.

Incoming Protocol - The protocol used for Incoming Ports Range, either TCP or UDP, or ALL (all protocols supported by the Router).

Status - The status of this entry, either Enabled or Disabled.

To add a new rule, follow the steps below.

1.Click the Add New… button, the next screen will pop-up as shown in Figure 4-35.

2.Select a common application from the Common Applications drop-down list, then the Trigger Port field and the Incoming Ports field will be automatically filled. If the Common Applications do not have the application you need, enter the Trigger Port and the Incoming Ports manually.

3.Select the protocol used for Trigger Port from the Trigger Protocol drop-down list, either TCP, UDP, or All.

4.Select the protocol used for Incoming Ports from the Incoming Protocol drop-down list, either TCP or UDP, or All.

5.Select Enable in Status field.

- 47 -

Page 55 Page 57
Image 56
Page 55 Page 57
Contents 300Mbps High Power Router Copyright & Trademarks FCC Statement Korea Warning Statements NCC Notice & Bsmi Notice Product Description 300Mbps High Power Router Yang Hongliang Product Manager of International BusinessContents 11.1 100 Package Contents Flexible Access Control Simple InstallationOverview of the Router Incredible SpeedMain Features ConventionsName Status Indication Panel LayoutFront Panel  Used as WPS button  Used as Reset buttonRear Panel System Requirements Installation Environment RequirementsConnecting the Router Hardware Installation of the 300Mbps High Power Router Quick Installation Guide TCP/IP ConfigurationSuccess result of Ping command Please check the connection following these stepsQuick Installation Guide Enter keyTL-WR841HP Quick Setup PPPoE 10 Quick Setup Static IP 11 Quick Setup Wireless  PSK Password You can enter Ascii or Hexadecimal characters Login StatusQuick Setup WPSUse the Wi-Fi Protected Setup Button II. Enter the client device’s PIN on the Router III. Enter the Router’s PIN on your client deviceNetwork 1 WANTL-WR841HP300Mbps High Power Router User Guide TL-WR841HP300Mbps High Power Router User Guide WAN PPPoE PPPoE Advanced Settings TL-WR841HP300Mbps High Power Router User Guide NSW / ACT nsw.bigpond.net.au TL-WR841HP300Mbps High Power Router User Guide 12 Pptp Settings  Note 2 LAN MAC CloneWireless Wireless Settings16 Wireless Settings TL-WR841HP300Mbps High Power Router User Guide Wireless Security 18 Wireless Security TL-WR841HP300Mbps High Power Router User Guide Wireless MAC Filtering Encryption You can select either Automatic, or Tkip or AES22 Wireless MAC Filtering To modify or delete an existing entryWireless Advanced Modify the information Click the Save button24 Wireless Advanced Wireless Statistics DhcpDhcp Settings 27 Dhcp SettingsDhcp Client List Address ReservationTo Reserve an IP address ForwardingVirtual Servers To set up a virtual server entry Port Triggering 33 Add or Modify a Virtual Server EntryTo add a new rule, follow the steps below 3 DMZ 35 Add or Modify a Port Triggering EntryUPnP To assign a computer or server to be a DMZ serverSecurity Basic SecurityAdvanced Security  Note Local Management 41 Local ManagementRemote Management  NoteParental Control To add a new entry, please follow the steps below44 Add or Modify Parental Control Entry 11Access Control Rule47 Access Control Rule Management There are two methods to add a new rule Method One48 Quick Setup Create a Host Entry TL-WR841HP300Mbps High Power Router User Guide Method Two 52 Add Internet Access Control Entry 53 Host Settings HostTarget 54 Add or Modify a Host Entry56 Target Settings For example If you 00-11-22-33-44-AA in settings below 57 Add or Modify an Access Target EntrySchedule To add a new schedule, follow the steps below60 Advanced Schedule Settings 12Advanced RoutingStatic Routing To add static routing entries, follow the steps belowBandwidth Control System Routing TableControl Settings Rules List14 IP & MAC Binding Setting Binding Settings69 Binding Settings To add IP & MAC Binding entries, follow the steps belowARP List To find an existing entry, follow the steps belowDynamic DNS Comexe.cn DdnsTo set up for DDNS, follow these instructions Dyndns.org Ddns74 Dyndns.org Ddns Settings Time Settings System Tools77 Time settings To set time manuallyTo set Daylight Saving DiagnosticTo set time automatically TL-WR841HP300Mbps High Power Router User Guide Firmware Upgrade 79 Diagnostic ResultsFactory Defaults Backup & RestoreReboot 82 Backup & Restore ConfigurationPassword System Log85 System Log Statistics Statistics Table Icmp TxTCP Appendix a FAQ Figure A-3 MAC Clone Want to use NetMeeting, what do I need to do?Figure A-5 Add or Modify a Virtual server Entry Figure A-7 Basic Security Want to build a WEB Server on the LAN, what should I do?Wireless stations cannot connect to the Router Figure A-9 Virtual ServersAppendix B Configuring the PC Configure TCP/IP componentShown in the Figure below  Setting IP address manually Figure B-3Now click OK to keep your settings Environmental and Physical WirelessGeneral Appendix D Glossary 101

Rev 1.0.0 1910010810 specifications

The TP-Link Rev 1.0.0 1910010810 is a powerful and versatile networking device aimed at enhancing connectivity in both home and office environments. Designed by TP-Link, a brand well-known for its innovative networking solutions, this model boasts several features and technologies that make it a strong choice for users seeking reliable internet access.

One of the standout characteristics of the TP-Link Rev 1.0.0 is its dual-band Wi-Fi capabilities. Operating on both the 2.4GHz and 5GHz frequency bands, this device enables users to experience faster speeds and reduced interference. The dual-band functionality is particularly useful in households with multiple devices, allowing users to connect their laptops, smartphones, tablets, and smart home devices without compromising speed or performance.

In terms of speed, the TP-Link Rev 1.0.0 supports Wi-Fi 5 technology, which can deliver speeds of up to 1.75 Gbps. This robust performance is ideal for bandwidth-intensive activities such as online gaming, streaming high-definition videos, and video conferencing. The MU-MIMO technology further enhances this performance by allowing multiple devices to communicate with the router simultaneously, reducing wait times and improving overall efficiency.

Security is another critical aspect of the TP-Link Rev 1.0.0. The device features advanced security protocols, including WPA3, which provides a higher level of protection against unauthorized access and potential threats. This means users can enjoy a more secure browsing experience without the constant worry of security breaches.

Setting up the TP-Link Rev 1.0.0 is straightforward, thanks to its intuitive web interface and mobile app. The TP-Link Tether app allows users to manage their network easily, providing options to customize settings, monitor device connections, and perform firmware updates. This user-friendly approach empowers even those with limited technical knowledge to optimize their network performance.

Additionally, the device is equipped with advanced QoS (Quality of Service) settings, which enable users to prioritize bandwidth for specific applications or devices. This feature ensures that critical activities, such as gaming or streaming, receive the necessary resources for optimal performance, enhancing the overall user experience.

In summary, the TP-Link Rev 1.0.0 1910010810 is a feature-rich networking device that caters to the needs of modern users. With its dual-band support, high-speed capabilities, robust security features, and user-friendly management options, it stands out as an excellent choice for anyone seeking to improve their internet connectivity and experience.
Top Page Image Contents