LED Explanation Name Status Indication, 5G/2.4G

RE200 AC750 WiFi Range Extender User Guide

zLED Explanation:

Name	Status	Indication
	Solid Green	The Range Extender is connected to the 5G/2.4G wireless network
		of your main Router/AP, and the signal strength is strong.
5G/2.4G	Solid Red	The Range Extender is connected to the 5G/2.4G wireless network
	Solid Red	of your main Router/AP, but the signal strength is weak.
		of your main Router/AP, but the signal strength is weak.
	Off	The Range Extender isn’t connected to your main Router/AP.
	On	The Range Extender’s wireless function is enabled.
Wireless Signal	Off	The Range Extender’s wireless function is disabled.
	On	A device is connected to the ETHERNET port, but there is no
	On	activity.
		activity.

ETHERNET	Flashing	A device is connected to the ETHERNET port, and is active.
	Off	No device is connected to the ETHERNET port.
	On	The Range Extender is on.
Power	Off	The Range Extender is off.
	On	The Range Extender has established a secure connection.
	Flashing	The Range Extender is establishing a secure connection.
RE
RE	Off	No active connection.
	Off	No active connection.

Table 1-1

z (RANGE EXTENDER/WPS): If your Wireless router or AP supports WPS or QSS function, you can press the WPS or QSS button and then press the RANGE EXTENDER button to establish a secure connection between the Wireless router or AP and the Range Extender RE200.

zRESET: This button is used to restore the Range Extender’s factory default settings. There are two ways to reset the Range Extender’s factory defaults:

Method One: With the Range Extender powered on, use a pin to press RESET button (about 1 seconds) until all the LEDs flash once. And then release the button and wait the Range Extender to reboot to its factory default settings.

Method Two: Restore the default settings from “System Tools > Factory Defaults” of the Range Extender's Web-based Management page.

zETHERNET: One 10/100Mbps RJ45 Ethernet port used to add wireless connectivity to an Ethernet-enabled device such as Internet TV, DVR, Gaming console and so on. Please note that this port is not allowed to be connected with router or AP.