RE200 AC750 WiFi Range Extender User Guide
zUse Web browser, such as Microsoft Internet Explorer 5.0 or above, Netscape Navigator 6.0 or above.
zOperating temperature of the Range Extender should be 0℃~40℃ (32℉~104℉).
zOperating humidity of the Range Extender should be 10%~90%RH
2.3Connecting the Device
Figure 2-1 Typical connection of RE200
To establish a typical connection of the Range Extender, please take the following steps:
1.Connect the Cable/DSL modem to a Wireless router with an Ethernet cable.
2.Plug your RE200 directly to a standard electrical wall socket, which is near the Wireless router.
3.Connect your Wireless Clients (such as notebook, pad, smart phone, etc.) to RE200 wirelessly. Or you can connect your PC to the sole LAN port of Range Extender via an Ethernet cable.
4.Log in the
(Please refer to Chapter 3 Quick Installation Guide or Chapter 4 Configure the Device for the configurations, as you need.) Through the web page configuration you can successfully connect RE200 to the wireless router.
5.Adjust an ideal location for RE200. (Please refer to Section 2.1 Before You Begin for detailed information about ideal location.)
5