SETUP

 

1. LENS

DC <┘

2. EXPOSURE

<┘

3.WHITE BAL. AWB

d.Move the joystick RIGHT (f) and LEFT (e) to adjust the mode and parameters of the selected item.

Press “Menu” to leave and goes to previous menu after setting. Move to “exit” and press “menu” button when you finish all settings.

For detail setting of each setup function, Please refer to “3.3. OSD Menu Setup”.

4.1.3 Lens Adjustment by Keyboard

1.Press Zoom in or Zoom out to adjust zoom; or turn the Joystick clockwise to zoom out, and counterclockwise to zoom in.

2.Press Focus N or Focus F to adjust focus.

4.2 Remote Control with EverFocus DVR

4.2.1 RS-485 Wiring

The connection to the DVR depends on DVR type. The EverFocus EDSR and EDR series (MPEG4) provide 2 looped RJ45 sockets with same pinout as EKB-500 keyboard (chapter 4.1.1). The DVR of Paragon and ECOR series as well as EverFocus video server have 2-pin screw terminal connectors for RS-485 interface.

4.2.2 Camera Operation and Setup by DVR

The DVR have different layout and functionality for PTZ control.

If the DVR does not provide buttons for PTZ OSD menu, following alternative commands can be used for EZ610 OSD menu:

Set Preset 95

Open OSD menu

Iris open (Iris +)

Enter / Set

Iris close (Iris -)

ESC / Close OSD menu

31

Page 31
Image 31
EverFocus EZ610 manual Remote Control with EverFocus DVR, Lens Adjustment by Keyboard, 1 RS-485 Wiring