EverFocus EZ610 manual Camera Component Description, Related Products

1.5 Camera Component Description

Speedy-mount Ring Sunshield

Use a coin or screwdriver to remove the cover Controls are inside the cover

1

2

3

4

Red: Menu mode

Green: Lens mode

1)Reset: To load the factory default configuration press the button, which is inside this hole, for 3 seconds. Please gently insert a thin, non-metallic device into the hole to operate the reset button.

2)Control Key: For setting Lens & OSD menu. Press the mini-joystick and hold for 5 seconds to switch between Lens & Menu setting. When the camera is in Lens mode, turn the mini-joystick up (c) or down (d) to zoom in/ zoom out. Turn the mini- joystick left (e) or right (f) to adjust focus.

3)Lens/Menu: Lens LED will turn green when you select the Lens adjustment mode. Menu LED will turn red when you select the Menu setting mode.

4)Video/GND: for aim and focus access to video at the camera, use the Video Test Cable supplied to connect to a hand held test monitor (EN220 or similar).

1.6 Related Products

In addition, you may order the following EverFocus products which are recommended for use with the camera to achieve the best performance:

•EverFocus control keyboard (EKB500)

•Any EverFocus DVR with RS-485 interface for PTZ control

11