EverFocus EZ610 manual Atw, Awb, Awc -Set, Manual, Burst, Color, Auto

ATW	Auto Tracking White Balance: This mode can be used within the color
	temperature range from 5,500°K to 6,000°K (eg, fluorescent light, outdoor,
	sodium vapor lamp or inside tunnels).
AWB	Auto White Balance: This mode can be used within the color temperature range
	from 2,500°K to 10,000°K. (default)
AWC ->SET	To find the optimal setting for the current luminance environment in this mode,
	point the camera toward a sheet of white paper, and press “SET”. If the
	environment changes, you will have to readjust it.
MANUAL	The manual adjustment mode enables a more precise adjustment. Please select
	ATW or AWC first. Then change to manual adjustment mode and press the
	SETUP button. Set the suitable color temperature, and increase or decrease the
	red and blue color values at the same time while checking the color changes of
	the objects in view.
	Press “RET” to save all settings in this menu and return to the previous menu.
	Press “END” to save all the menu settings and exit.
INDOOR	Select this option when the color temperature is 5,600°K.
OUTDOOR	Select this option when the color temperature is 3,300°K

Press “RET” to saves all settings in this menu and returns to the previous menu. Press “END” to save all the menu settings and exit.

3.3.5 DAY NIGHT

These settings control the operation of the camera when the illumination level changes. Choices are Color at all times; B/W at all times; or color when illumination is bright, switching to B/W in low light. EZ610 camera will have excellent IR sensitivity when displaying a low light B/W picture.

B/W	The picture is always displayed in B/W.
BURST	OFF/ON:
	ON:	Retains the color burst information; minor color noise may appear
	OFF:	when ambient illumination is low.
		With color burst signal off, picture will be pure B/W.
	Press “RET” to save all settings in the DAY/NIGHT menu and returns to the
	previous menu.
	Press “END” to save all the setting menus and exit.
COLOR	The picture is always displayed in color, even at low light levels.
	NOTE: In “color” operation, there is an IR “cut” (blocking) filter between the
	lens and the sensor; thus EZ610 camera has very little IR sensitivity when
	the image is displayed in color. (default)
AUTO	The picture switches to color in a normal (bright) environment and switches
	to B/W when the ambient illumination is low. The switching point is controlled

by the video signal level.

Note: AGC selection must be set as middle or high in order to employ the

23