Sanyo DSR-3009 manual Menu Setting Procedures

Menu Setting Procedures

REC RATE (Default setting: A 30 FPS)

This sets the recording rate for normal recording.

1 Select the recording cycle for normal recording from the menu.

A 60, A 30, A 20, A 15, A 10, 7.5, 6, 5, 4.286, 3.75, 3.333, 3, 2.727, 2.308, 2, 1.667, 1.429, 1.25, 1.111, 1, 0.5, 0.333, 0.25, 0.2, 0.1, 0.05, 0.033 (Units: FPS)

The image resolution is determined by image quality

×REC RATE. The higher the image quality and the faster the REC RATE setting, the higher is the image resolution. However, higher image resolutions also consume disk space more quickly, and so the total recording time available will be reduced. You should adjust the value as required while considering these factors.

If pre-alarm recording is set to “ ON” , the REC RATE will be limited to A 15 FPS.

The REC RATE during timer recording should be set separately using the [TIMER SET] menu. (See p. 14)

REC PROGRAM GROUP (Default setting: OFF)

This sets the camera images to be recorded during normal recording.

1 Select the camera images to be recorded during normal recording from the menu. (See p. 9)

OFF: No program group is specified and all camera images are recorded.

P-1:Specifies program No. 1.

P-2:Specifies program No. 2.

P-3:Specifies program No. 3.

P-4:Specifies program No. 4.

The [REC PROGRAM GROUP] for timer recording should be set separately using the [TIMER SET] menu. (See p. 14)

Click [SAVE] to complete the settings (or changes) for the sub-menu that is displayed on the screen. The available time for recording under the conditions that have been set will be displayed in parentheses for reference.

English 13