Menu Setting Procedures
10. ALARM DURATION SET
The duration of alarm recording can be set separately for each camera. The DURATION setting for each camera that is made using the [ALARM DURATION SET] menu is effective when [DURATION] in the [ALARM RECORDING] menu is set to “INDIV.” (See p. 16)
1
2
Select the alarm recording duration for each camera from the menu.
5 SEC, 10 SEC, 20 SEC, 40 SEC, 1 MIN, 2 MIN, 3 MIN, 4 MIN, 5 MIN, 10 MIN, 15 MIN, CC
(Default setting: 5 SEC)
Click [SAVE] to set (or change) the alarm recording durations for each camera.
Screen example for
Screen example for
11. DISPLAY SET
This specifies the information to be displayed on the monitor by selecting “ON” or “OFF” in the menu.
Because this setting specifies the information to be displayed on the monitor that is connected to the main unit, it will have no effect on the computer screen.
DATE (Default setting: ON)
Current date or recording date
TIME (Default setting: ON)
Current time or recording time
QUALITY (Default setting: ON)
Quality of images being recorded or played back
REC RATE (Default setting: OFF)
Recording rate for images being recorded or played back
ALARM COUNT (Default setting: ON) Cumulative number of alarms
The maximum count that can be displayed is 9999. If the count exceeds this number, it will be reset to 0.
ALARM TYPE (Default setting: ON) Type of alarm recording
For alarm recording: “ALARM” is displayed.
For
Click [SAVE] to complete the DISPLAY SET menu settings (or changes) that are displayed on the screen.
18 | English |