Menu Setting Procedures
5. RECORDING CONDITIONS SET
This sets the overwrite conditions and remaining disk capacity warning criteria for each recording area.
NORMAL RECORDING AREA OVERWRITE (Default setting: ON)
This specifies whether to stop recording or to continue recording by overwriting images that are currently recorded on the hard disk when the normal recording area has become full.
1 Select [ON/OFF] from the menu.
•ON: When the normal recording area becomes full, images will begin to be overwritten automatically from the start of the normal recording area.
•OFF: Recording will stop when the normal recording area becomes full.
ALARM RECORDING AREA OVERWRITE (Default setting: ON)
This specifies whether to stop recording or to continue recording by overwriting images that are currently recorded on the hard disk when the alarm recording area has become full.
1 Select [ON/OFF] from the menu.
•ON: When the alarm recording area becomes full, images will begin to be overwritten automatically from the start of the alarm recording area.
•OFF: Recording will stop when the alarm recording area becomes full.
REMAINING DISK WARNING
The buzzer can be set to sound a warning if the NORMAL RECORDING AREA OVERWRITE and ALARM RECORDING AREA OVERWRITE settings are “ OFF” and the remaining disk capacity becomes low (see p. 25). The remaining disk area value at which a warning will be given can be specified here.
1 Set the remaining disk area value from the menu.
Setting range: 1% to 10% (1% units)
If the OVERWRITE setting is “ ON” for both recording areas, no remaining area warning is necessary, and so “ **” is displayed and REMAINING DISK WARNING cannot be set.
Click [SAVE] to complete the sub-menu settings (or changes).
English | 11 |
