TP-Link tl-sg1048, TL-SG1024, TL-SG1016D, TL-SG1008 manual Site Requirements, Temperature/Humidity

Page 11

Gigabit Unmanaged Switch

Site Requirements

Temperature/Humidity





Please keep a proper temperature and humidity in the equipment room. Too high/low humidity may lead to bad insulation, electricity leakage, mechanical property changes and corrosions. Too high temperature may accelerate aging of the insulation materials and can thus significantly shorten the service life of the device. For normal temperature and humidity of the device, please check the following table.

Environment

Temperature

Humidity

 

 

 

Operating

0~ 40

10% ~ F0%RH Non-condensing

 

 

 

Storage

-40~ F0

5% ~ F0%RH Non-condensing

 

 

 

Clearness

The dust accumulated on the Switch can be absorbed by static electricity and result in poor contact of metal contact points. Some measures have been taken for the device to prevent static electricity, but too strong static electricity can cause deadly damage to the electronic elements on the internal circuit board. To avoid the effect of static electricity on the operation of the Switch, please attach much importance to the following items:

Dust the device regularly, and keep the indoor air clean.

Keep the device well grounded and ensure static electricity has been transferred.

Electromagnetic Interference

Electronic elements including capacitance and inductance on the device can be affected by external interferences, such as conducted emission by capacitance coupling, inductance coupling, and impedance coupling. To decrease the interferences, please make sure to take the following measures:

Use the power supply that can effectively filter interference from the power grid.

Keep the device far from high-frequency, strong-current devices, such as radio transmitting station.

Use electromagnetic shielding when necessary.

Installation 06

Image 11
Contents Installation Guide Page CE Mark Warning Copyright & Trademarks FCC StatementConventions Related Document About this Installation GuideAudience Contents Product Overview FeaturesCccccccccc Introduction Front Panel AppearanceLEDs Rear Panel Power SocketSafety Precautions CCCCCCCCCCInstallationPackage Contents Site Requirements Temperature/HumidityLightening Protection Installation ToolsRack Installation Product InstallationDesktop Installation Fffffffffff Rack Installation Requirements for Cabling Outdoors Cccccccccc Lightning ProtectionCabling Reasonably Requirements for Cabling Indoors Connect to Ground Connecting to the Grounding BarEquipotential Bonding Connecting to the Ground via the Power SupplyUse Lightning Arrester Lightning Protection Ethernet Port Verify InstallationPower On CCCCCCCCCCConnectionInitialization Qqqq The Power LED is not lit Appendix a TroubleshootingFCC, CE Appendix B SpecificationsAppendix C Technical Support Page Page Mail support@tp-link.com F106503699 Rev
Related manuals
Manual 32 pages 38.68 Kb Manual 6 pages 20.27 Kb Manual 32 pages 8.69 Kb

TL-SG1024D, TL-SG1016D, TL-SG1016, TL-SG1008, TL-SG1024 specifications

TP-Link has earned a reputation for delivering reliable and high-performance networking solutions, and its series of Gigabit switches is no exception. Among its offerings, the TL-SG1016, TL-SG1048, TL-SG1024, TL-SG1008, and TL-SG1016D stand out for their robust features, advanced technologies, and versatility in meeting the needs of various network environments.

The TL-SG1016 is a 16-port Gigabit Ethernet switch designed for small to medium-sized businesses. It boasts a user-friendly design, enabling easy plug-and-play setup without the need for configuration. With a wide range of supported operating systems, this switch is compatible with various devices, ensuring seamless integration into existing networks. It supports auto-negotiation, delivering optimal port speed and duplex mode, thus enhancing overall performance.

For those requiring additional port density, the TL-SG1048 offers 48 ports while retaining the same high performance. It’s ideal for larger networks, providing ample connectivity for devices and users. The switch features Layer 2 technology, ensuring efficient data forwarding and enhanced traffic management. Its fanless design contributes to silent operation, making it suitable for office environments where noise levels must be kept to a minimum.

The TL-SG1024, with its 24-port configuration, strikes a balance between size and performance, making it perfect for growing networks. Much like its siblings, it utilizes Gigabit Ethernet to facilitate high-speed data transfers. An essential characteristic of this switch is its energy efficiency—compliance with IEEE 802.3az standards allows it to save power during low-traffic periods, contributing to lower operational costs.

The TL-SG1008 is an 8-port switch designed for small offices or home use. Despite its compact size, it delivers Gigabit speeds across all ports, ensuring that bandwidth-intensive applications run smoothly. It also features a plug-and-play setup for straightforward installation and ease of use.

Finally, the TL-SG1016D is a cost-effective 16-port switch tailored for small office needs. It includes features like auto-MDI/MDIX, which eliminates the need for crossover cables, allowing for versatility in connections. The switch’s metal casing ensures durability, while its power-saving technology minimizes energy consumption.

These TP-Link switches effectively combine performance, energy efficiency, and user-friendly features, making them suitable for diverse networking needs in both commercial and residential environments. Their reliability and excellent performance make them a preferred choice for users looking to enhance their network infrastructure.