The Switch’s LEDs are located on the front panel:
¾Power LED: This indicator will light up when the Switch powers up.
¾LEDs (1~8): The LED indicates Link/Active status. The corresponding LED indicator will light solid green when connected to a network device. It flashes green when data is being transmitted or received on the working connection.
Note:
The LEDs’ description above explains the device’s working status after initialization.
2.2 Rear Panel
Figure 2-2 TL-SG1008D Switch Rear Panel
The following parts are located on the rear panel.
¾POWER: The POWER socket is where you will connect the power adapter. Please use the power adapter provided with this TL-SG1008D Switch.
¾Port (1-8): The TL-SG1008D Switch is equipped with 8 10/100/1000Mbps Auto-Sensing RJ45 ports where you will connect your network devices. The working status can be indicated by the corresponding LEDs on the front panel.
4