|
| ZyAIR | |
|
| Table 4 Troubleshooting | |
|
|
|
|
| PROBLEM | CORRECTIVE ACTION |
|
|
|
|
|
| Cannot ping any | If the LAN LEDs are all off, check the cable connections between the ZyAIR and your |
|
| computer on the | LAN computers. |
|
| LAN. | Verify that the IP address, subnet mask of the ZyAIR and the LAN computers are in |
|
|
|
| |
|
| the same IP address range. |
|
|
|
|
|
| Cannot ping any | Make sure the wireless card is properly inserted in the ZyAIR and the WIRELESS |
|
| computer on the | LED is on. |
|
| WLAN | Make sure the wireless card on the wireless client is working properly. |
|
|
|
| |
|
| Check that both the ZyAIR and wireless client(s) are using the same ESSID, channel |
|
|
| and WEP keys (if WEP encryption is activated). |
|
|
|
|
|
| Cannot get a WAN | Check your Internet connection settings (refer to section 3.2). |
|
| IP address from the | You need a user name and password if you’re using PPPoE or PPPoA |
|
| ISP. |
| |
| encapsulation. Make sure that you have entered the correct Service Name (PPPoE |
| |
|
|
| |
|
| encapsulation only), User Name and Password (the username and password are |
|
|
| case sensitive). Refer to section 3.2 for more information. |
|
| Cannot access the | Check your Internet connection settings (refer to section 3.2). |
|
| Internet. | Make sure you entered the correct user name and password. |
|
|
|
| |
|
| For wireless clients, check that both the ZyAIR and wireless client(s) are using the |
|
|
| same ESSID, channel and WEP keys (if WEP encryption is activated). |
|
|
|
|
|
21