ZyXEL Communications B-4000 manual Introducing the ZyAIR, Rear Panel Connections, Front Panel LEDs

ZyAIR B-4000

1 Introducing the ZyAIR

The ZyAIR Hot Spot Gateway combines an 802.11b wireless access point, router, 4-port switch and service gateway in one box. An “exclusive printer” connects directly to the ZyAIR, allowing you to easily print subscriber statements. The ZyAIR is ideal for offices, coffee shops, libraries, hotels and airport terminals catering to subscribers that seek Internet access. You should have an Internet account already set up and have been given usernames, passwords etc. required for Internet access.

1.1 Rear Panel Connections

	Figure 1 ZyAIR Rear Panel
	Table 1 Rear Panel Connections
LABEL	DESCRIPTION
DEVICE PORT	Use the printer cable to connect the included printer (“exclusive printer”) to this port.
WAN	Connect your broadband modem to this port with the Ethernet cable that came with your
	modem.
LAN 1-4	These ports are auto-crossover, (”auto MDI/MDI-X”) which means you can use either a
	straight-through or crossover Ethernet cable to connect the ZyAIR to a computer or a hub.
Power	After you’ve made the above connections, connect the ZyAIR’s included power adaptor to
	the ZyAIR’s power socket. Use only the included power adaptor. The PWR LED turns on.
	The SYS LED blinks while performing system testing and then turns steady on if the
	testing is successful. A LAN LED turns on if a LAN port is properly connected. Refer to the
	following table for more detailed LED descriptions.

1.2 The Front Panel LEDs

2