Connect TV
Option 1: Connect through AV cable - Basic quality
AV out provides basic analogue connectivity.
Note
•To use Philips EasyLink, you must use HDMI connection (see “Use Phlips EasyLink”).
•This unit is HDMI CEC compatible. It enables the connectedTV/device to control each other over HDMI.
VIDEO
TV
TV
HDMI IN
1Connect one end of the AV cable (red/ white/yellow) to the AV input sockets on theTV.
2Connect the other end to the AV OUT
(VIDEO , AUDIO L/R) sockets on the unit.
Note
•If you want to listen to sound from the unit instead of fromTV, connect the video cable (yellow) only. Do not connect the audio cable (red and white).
Option 2: Connect through HDMI - Highest quality
If you want to experience full
aConnect an HDMI cable (not supplied) to:
•- the HDMI socket on this unit.
•- the HDMI input socket on theTV.
Tip
•If yourTV has only a DVI connection, connect through a HDMI/DVI adaptor.An extra audio connection is needed to complete this connection.
Option 3: Connect through component - Higher quality
Component video provides better picture quality than AV out connections.Though component video supports
12EN